From c28fcf061758d71d87362186932ac72cbf847ab4 Mon Sep 17 00:00:00 2001 From: Samuel Obuch Date: Fri, 13 Feb 2026 18:37:19 +0100 Subject: [PATCH] fix(docs): add missing USB pins --- docs/en/api-guides/jtag-debugging/configure-builtin-jtag.rst | 4 ++-- .../api-guides/jtag-debugging/configure-builtin-jtag.rst | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/docs/en/api-guides/jtag-debugging/configure-builtin-jtag.rst b/docs/en/api-guides/jtag-debugging/configure-builtin-jtag.rst index ebaa2d65d1..362a75c415 100644 --- a/docs/en/api-guides/jtag-debugging/configure-builtin-jtag.rst +++ b/docs/en/api-guides/jtag-debugging/configure-builtin-jtag.rst @@ -8,8 +8,8 @@ Configure {IDF_TARGET_NAME} Built-in JTAG Interface :link_to_translation:`zh_CN:[中文]` -{IDF_TARGET_JTAG_PIN_Dneg:default="Not Updated!", esp32c3="GPIO18", esp32c6="GPIO12", esp32s3="GPIO19", esp32h2="GPIO26", esp32p4="GPIO24"} -{IDF_TARGET_JTAG_PIN_Dpos:default="Not Updated!", esp32c3="GPIO19", esp32c6="GPIO13", esp32s3="GPIO20", esp32h2="GPIO27", esp32p4="GPIO25"} +{IDF_TARGET_JTAG_PIN_Dneg:default="Not Updated!", esp32c3="GPIO18", esp32c6="GPIO12", esp32s3="GPIO19", esp32h2="GPIO26", esp32p4="GPIO24", esp32c5="GPIO13", esp32c61="GPIO12", esp32h4="GPIO13", esp32h21="GPIO17"} +{IDF_TARGET_JTAG_PIN_Dpos:default="Not Updated!", esp32c3="GPIO19", esp32c6="GPIO13", esp32s3="GPIO20", esp32h2="GPIO27", esp32p4="GPIO25", esp32c5="GPIO14", esp32c61="GPIO13", esp32h4="GPIO14", esp32h21="GPIO18"} {IDF_TARGET_NAME} has built-in JTAG circuitry and can be debugged without any additional chip. Only a USB cable connected to the D+/D- pins is necessary. For dev kits without an exposed USB Serial Jtag connector, a USB breakout cable can be used. The necessary connections are shown in the following section. diff --git a/docs/zh_CN/api-guides/jtag-debugging/configure-builtin-jtag.rst b/docs/zh_CN/api-guides/jtag-debugging/configure-builtin-jtag.rst index 5c46a9bdc1..efbfa237ca 100644 --- a/docs/zh_CN/api-guides/jtag-debugging/configure-builtin-jtag.rst +++ b/docs/zh_CN/api-guides/jtag-debugging/configure-builtin-jtag.rst @@ -8,8 +8,8 @@ :link_to_translation:`en:[English]` -{IDF_TARGET_JTAG_PIN_Dneg:default="未更新!", esp32c3="GPIO18", esp32c6="GPIO12", esp32s3="GPIO19", esp32h2="GPIO26", esp32p4="GPIO24"} -{IDF_TARGET_JTAG_PIN_Dpos:default="未更新!", esp32c3="GPIO19", esp32c6="GPIO13", esp32s3="GPIO20", esp32h2="GPIO27", esp32p4="GPIO25"} +{IDF_TARGET_JTAG_PIN_Dneg:default="Not Updated!", esp32c3="GPIO18", esp32c6="GPIO12", esp32s3="GPIO19", esp32h2="GPIO26", esp32p4="GPIO24", esp32c5="GPIO13", esp32c61="GPIO12", esp32h4="GPIO13", esp32h21="GPIO17"} +{IDF_TARGET_JTAG_PIN_Dpos:default="Not Updated!", esp32c3="GPIO19", esp32c6="GPIO13", esp32s3="GPIO20", esp32h2="GPIO27", esp32p4="GPIO25", esp32c5="GPIO14", esp32c61="GPIO13", esp32h4="GPIO14", esp32h21="GPIO18"} {IDF_TARGET_NAME} 内置了 JTAG 电路，无需额外的芯片即可进行调试。只需将 USB 线连接到 D+/D- 引脚即可。对于没有外露 USB 串行 JTAG 连接器的开发板，可以使用 USB 转接线。所需的连接方式将在下一节中介绍。