diff --git a/examples/.build-rules.yml b/examples/.build-rules.yml
index 35c92791f..1efbdfa6c 100644
--- a/examples/.build-rules.yml
+++ b/examples/.build-rules.yml
@@ -47,7 +47,7 @@ examples/controller:
 
 examples/zigbee_bridge:
   enable:
-    - if: IDF_TARGET in ["esp32"]
+    - if: IDF_TARGET in ["esp32s3"]
       temporary: true
       reason: the other targets are not tested yet
 
diff --git a/examples/zigbee_bridge/README.md b/examples/zigbee_bridge/README.md
index 02452e2b0..a850f49a7 100644
--- a/examples/zigbee_bridge/README.md
+++ b/examples/zigbee_bridge/README.md
@@ -29,15 +29,18 @@ Connect the two SoCs via UART, below is an example setup with ESP32-S3 DevKitC a
 
 ### 1.2 Build and flash the RCP (ESP32-H2)
 
+Please use the [esp_zigbee_rcp](https://github.com/espressif/esp-zigbee-sdk/tree/main/examples/esp_zigbee_rcp) example in esp-zigbee-sdk repository to build the RCP for the ZigBee Bridge.
+
 ```
-cd ${IDF_PATH}/examples/zigbee/esp_zigbee_rcp/
+git clone https://github.com/espressif/esp-zigbee-sdk.git
+cd esp-zigbee-sdk/examples/esp_zigbee_rcp/
 idf.py set-target esp32h2
 idf.py -p <port> build flash
 ```
 
 **Note**: The two SoCs on the Zigbee Gateway DevKit board use USB ports while the standalone DevKit boards use UART ports.
 
-### 1.3 Build and flash the Bridge (ESP32S3)
+### 1.3 Build and flash the Bridge (ESP32-S3)
 
 For Standalone DevKit boards:
 
@@ -91,7 +94,7 @@ Data = [
 Build and run Zigbee Bulb app on another ESP32-H2 board.
 
 ```
-cd ${IDF_PATH}/examples/zigbee/light_sample/HA_on_off_light
+cd /path/to/esp-zigbee-sdk/examples/esp_zigbee_HA_sample/HA_on_off_light
 idf.py set-target esp32h2
 idf.py -p <port> build flash monitor
 ```
diff --git a/examples/zigbee_bridge/main/idf_component.yml b/examples/zigbee_bridge/main/idf_component.yml
index 1d60ab379..a092f793f 100644
--- a/examples/zigbee_bridge/main/idf_component.yml
+++ b/examples/zigbee_bridge/main/idf_component.yml
@@ -1,7 +1,7 @@
 ## IDF Component Manager Manifest File
 dependencies:
-  espressif/esp-zboss-lib: "~0.5.0"
-  espressif/esp-zigbee-lib: "~0.7.0"
+  espressif/esp-zboss-lib: "~1.0.0"
+  espressif/esp-zigbee-lib: "~1.0.0"
   ## Required IDF version
   idf:
     version: ">=5.0.0"
diff --git a/examples/zigbee_bridge/sdkconfig.defaults b/examples/zigbee_bridge/sdkconfig.defaults
index 30eabc34e..21342b062 100644
--- a/examples/zigbee_bridge/sdkconfig.defaults
+++ b/examples/zigbee_bridge/sdkconfig.defaults
@@ -50,3 +50,6 @@ CONFIG_MBEDTLS_HKDF_C=y
 # Increase LwIP IPv6 address number to 6 (MAX_FABRIC + 1)
 # unique local addresses for fabrics(MAX_FABRIC), a link local address(1)
 CONFIG_LWIP_IPV6_NUM_ADDRESSES=6
+
+# Increase matter console stack size
+CONFIG_ESP_MATTER_CONSOLE_TASK_STACK=3072
diff --git a/examples/zigbee_bridge/sdkconfig.defaults.zb_gw_board b/examples/zigbee_bridge/sdkconfig.defaults.zb_gw_board
index e62eacf1c..28b666dfa 100644
--- a/examples/zigbee_bridge/sdkconfig.defaults.zb_gw_board
+++ b/examples/zigbee_bridge/sdkconfig.defaults.zb_gw_board
@@ -48,3 +48,6 @@ CONFIG_MBEDTLS_HKDF_C=y
 # Increase LwIP IPv6 address number to 6 (MAX_FABRIC + 1)
 # unique local addresses for fabrics(MAX_FABRIC), a link local address(1)
 CONFIG_LWIP_IPV6_NUM_ADDRESSES=6
+
+# Increase matter console stack size
+CONFIG_ESP_MATTER_CONSOLE_TASK_STACK=3072