ci(pytest): declare markers in conftest.py instead of pytest.ini

pytest.ini

@@ -18,74 +18,6 @@ filterwarnings =
   ignore::DeprecationWarning:google.protobuf.*:
   ignore::_pytest.warning_types.PytestExperimentalApiWarning
 
-markers =
-  # target markers
-  esp32: support esp32 target
-  esp32s2: support esp32s2 target
-  esp32s3: support esp32s3 target
-  esp32c3: support esp32c3 target
-  esp32c2: support esp32c2 target
-  esp32c6: support esp32c6 target
-  esp32h4: support esp32h4 target
-  supported_targets: support all supported targets ('esp32', 'esp32s2', 'esp32c3', 'esp32s3', 'esp32c2', 'esp32c6')
-  preview_targets: support all preview targets ('linux', 'esp32h4')
-  all_targets: support all targets, including supported ones and preview ones
-  temp_skip_ci: temp skip ci for specified targets, can only work with `supported_targets`, `preview_targets`, `all_targets`
-
-  # env markers
-  generic: tests should be run on generic runners
-  nightly_run: tests should be executed as part of the nightly trigger pipeline
-  flash_suspend: support flash suspend feature
-  ip101: connected via wired 10/100M ethernet
-  lan8720: connected via LAN8720 ethernet transceiver
-  quad_psram: runners with quad psram
-  octal_psram: runners with octal psram
-  usb_host: usb host runners
-  usb_host_flash_disk: usb host runners with USB flash disk attached
-  usb_device: usb device runners
-  ethernet_ota: ethernet OTA runners
-  flash_encryption: Flash Encryption runners
-  flash_encryption_f4r8: Flash Encryption runners with 4-line flash and 8-line psram
-  flash_encryption_f8r8: Flash Encryption runners with 8-line flash and 8-line psram
-  flash_mutli: Multiple flash chips tests
-  psram: Chip has 4-line psram
-  ir_transceiver: runners with a pair of IR transmitter and receiver
-  twai_transceiver: runners with a TWAI PHY transceiver
-  flash_encryption_wifi_high_traffic: Flash Encryption runners with wifi high traffic support
-  ethernet: ethernet runner
-  ethernet_flash_8m: ethernet runner with 8mb flash
-  ethernet_router: both the runner and dut connect to the same router through ethernet NIC
-  wifi_ap: a wifi AP in the environment
-  wifi_router: both the runner and dut connect to the same wifi router
-  wifi_high_traffic: wifi high traffic runners
-  wifi_wlan: wifi runner with a wireless NIC
-  xtal_26mhz: runner with 26MHz xtal on board
-  xtal_40mhz: runner with 40MHz xtal on board
-  external_flash: external flash memory connected via VSPI (FSPI)
-  sdcard_sdmode: sdcard running in SD mode
-  sdcard_spimode: sdcard running in SPI mode
-  MSPI_F8R8: runner with Octal Flash and Octal PSRAM
-  MSPI_F4R8: runner with Quad Flash and Octal PSRAM
-  MSPI_F4R4: runner with Quad Flash and Quad PSRAM
-  test_jtag_arm: runner where the chip is accessible through JTAG as well
-  adc: ADC related tests should run on adc runners
-  xtal32k: Runner with external 32k crystal connected
-  no32kXtal: Runner with no external 32k crystal connected
-  multi_dut_modbus_rs485: a pair of runners connected by RS485 bus
-  psramv0: Runner with PSRAM version 0
-
-  # multi-dut markers
-  ieee802154: ieee802154 related tests should run on ieee802154 runners.
-  i154_multi_dut: tests should be used for i154, such as openthread.
-  wifi_two_dut: tests should be run on runners which has two wifi duts connected.
-  generic_multi_device: generic multiple devices whose corresponding gpio pins are connected to each other.
-  twai_network: multiple runners form a TWAI network.
-  sdio_master_slave: Test sdio multi board.
-
-  # host_test markers
-  host_test: tests which shouldn not be built at the build stage, and instead built in host_test stage.
-  qemu: build and test using qemu-system-xtensa, not real target.
-
 # log related
 log_cli = True
 log_cli_level = INFO