mirror of
https://github.com/espressif/esp-idf.git
synced 2026-04-27 19:13:21 +00:00
Shu Chen
4c39269f3b
feat(openthread): support 154 debug features on RCP See merge request espressif/esp-idf!44447
270 lines
11 KiB
Plaintext
270 lines
11 KiB
Plaintext
menu "IEEE 802.15.4"
|
|
visible if SOC_IEEE802154_SUPPORTED
|
|
|
|
config IEEE802154_ENABLED
|
|
bool "IEEE802154 Enable"
|
|
default "y" if SOC_IEEE802154_SUPPORTED
|
|
|
|
config IEEE802154_RX_BUFFER_SIZE
|
|
int "The number of 802.15.4 receive buffers"
|
|
depends on IEEE802154_ENABLED
|
|
default 20
|
|
range 2 100
|
|
help
|
|
Number of receive buffers allocated for IEEE 802.15.4 frames.
|
|
Increasing this value allows more frames to be buffered before processing,
|
|
but consumes more memory.
|
|
|
|
choice IEEE802154_CCA_MODE
|
|
depends on IEEE802154_ENABLED
|
|
prompt "Clear Channel Assessment (CCA) mode"
|
|
default IEEE802154_CCA_ED
|
|
help
|
|
Select the Clear Channel Assessment (CCA) mode used to determine if the
|
|
channel is clear before transmission. CCA is required by the IEEE 802.15.4
|
|
standard to avoid collisions.
|
|
|
|
config IEEE802154_CCA_CARRIER
|
|
bool "Carrier sense only"
|
|
help
|
|
CCA reports channel busy only if a valid IEEE 802.15.4 signal is detected.
|
|
This mode is less sensitive to non-802.15.4 interference.
|
|
|
|
config IEEE802154_CCA_ED
|
|
bool "Energy above threshold"
|
|
help
|
|
CCA reports channel busy if the energy level exceeds the configured threshold.
|
|
This is the default mode and provides good balance between sensitivity and reliability.
|
|
|
|
config IEEE802154_CCA_CARRIER_OR_ED
|
|
bool "Carrier sense OR energy above threshold"
|
|
help
|
|
CCA reports channel busy if either a valid IEEE 802.15.4 signal is detected OR
|
|
the energy level exceeds the threshold. This is the most sensitive mode.
|
|
|
|
config IEEE802154_CCA_CARRIER_AND_ED
|
|
bool "Carrier sense AND energy above threshold"
|
|
help
|
|
CCA reports channel busy only if both a valid IEEE 802.15.4 signal is detected
|
|
AND the energy level exceeds the threshold. This is the least sensitive mode.
|
|
endchoice
|
|
|
|
config IEEE802154_CCA_MODE
|
|
depends on IEEE802154_ENABLED
|
|
int
|
|
default 0 if IEEE802154_CCA_CARRIER
|
|
default 1 if IEEE802154_CCA_ED
|
|
default 2 if IEEE802154_CCA_CARRIER_OR_ED
|
|
default 3 if IEEE802154_CCA_CARRIER_AND_ED
|
|
|
|
config IEEE802154_CCA_THRESHOLD
|
|
int "CCA detection threshold"
|
|
depends on IEEE802154_ENABLED
|
|
range -120 0
|
|
default -75
|
|
help
|
|
Energy detection threshold for CCA, in dBm. The channel is considered busy
|
|
if the detected energy exceeds this threshold. Lower values make the radio
|
|
more sensitive to interference but may cause false positives.
|
|
|
|
config IEEE802154_PENDING_TABLE_SIZE
|
|
int "Pending table size"
|
|
depends on IEEE802154_ENABLED
|
|
range 1 100
|
|
default 20
|
|
help
|
|
Size of the pending data table used to track frames waiting to be sent to
|
|
sleeping devices. Each entry consumes memory, so adjust based on the number
|
|
of sleeping child devices in your network.
|
|
|
|
config IEEE802154_MULTI_PAN_ENABLE
|
|
bool "Enable multi-pan feature for frame filter"
|
|
depends on IEEE802154_ENABLED
|
|
default n
|
|
help
|
|
Enable IEEE 802.15.4 multi-PAN (Personal Area Network) support. This allows
|
|
the device to participate in multiple PANs simultaneously by filtering frames
|
|
based on PAN ID.
|
|
|
|
config IEEE802154_INTERFACE_NUM
|
|
int "Number of IEEE802154 interfaces"
|
|
depends on IEEE802154_ENABLED
|
|
range 1 1 if !IEEE802154_MULTI_PAN_ENABLE
|
|
range 1 4 if IEEE802154_MULTI_PAN_ENABLE
|
|
default 1 if !IEEE802154_MULTI_PAN_ENABLE
|
|
default 2 if IEEE802154_MULTI_PAN_ENABLE
|
|
help
|
|
Number of IEEE802154 interfaces
|
|
|
|
config IEEE802154_TIMING_OPTIMIZATION
|
|
bool "Enable throughput optimization"
|
|
depends on IEEE802154_ENABLED
|
|
default y
|
|
help
|
|
Enabling this option increases throughput by ~5% at the expense of ~2.1k
|
|
IRAM code size increase.
|
|
|
|
config IEEE802154_SLEEP_ENABLE
|
|
# Todo: Remove when support safe power-down of the power domain (IDF-7317)
|
|
bool "Enable IEEE802154 light sleep"
|
|
depends on PM_ENABLE && IEEE802154_ENABLED
|
|
default n
|
|
help
|
|
Enabling this option allows the IEEE802.15.4 module to be powered down during automatic light sleep,
|
|
which reduces current consumption.
|
|
|
|
config IEEE802154_DEBUG
|
|
bool "Enable IEEE802154 Debug"
|
|
depends on IEEE802154_ENABLED
|
|
default n
|
|
help
|
|
Enabling this option allows different kinds of IEEE802154 debug output.
|
|
All IEEE802154 debug features increase the size of the final binary.
|
|
|
|
menu "IEEE 802.15.4 Debug Parameters"
|
|
depends on IEEE802154_DEBUG
|
|
|
|
config IEEE802154_DEBUG_ASSERT_MONITOR
|
|
bool "Enable IEEE802154 assert monitor"
|
|
default n
|
|
help
|
|
Enable monitoring and detection of abnormal or unexpected states during
|
|
IEEE 802.15.4 operation. When enabled, performs additional runtime checks
|
|
and assertions to catch potential driver issues early.
|
|
|
|
config IEEE802154_RX_BUFFER_STATISTIC
|
|
bool "Rx buffer statistic"
|
|
default n
|
|
help
|
|
Enable tracking of receive buffer allocation and deallocation. This provides
|
|
statistics on buffer usage patterns, which can help optimize buffer sizing
|
|
for your application.
|
|
|
|
config IEEE802154_ASSERT
|
|
bool "Enrich the assert information"
|
|
select IEEE802154_RECORD
|
|
default n
|
|
help
|
|
Enable enhanced assert information. When an assertion fails, additional
|
|
context including state, events, and commands will be printed to help
|
|
diagnose the issue. Automatically enables IEEE802154_RECORD.
|
|
|
|
config IEEE802154_RECORD
|
|
bool "Record the information with IEEE802154 state and event"
|
|
default n
|
|
help
|
|
Enable recording of IEEE 802.15.4 driver state, events, and commands.
|
|
Probe code is added throughout the driver to capture runtime information
|
|
for debugging purposes. This is a prerequisite for other RECORD_* options.
|
|
|
|
config IEEE802154_RECORD_EVENT
|
|
bool "Enable record event information for debugging"
|
|
depends on IEEE802154_RECORD
|
|
default n
|
|
help
|
|
Record IEEE 802.15.4 driver events in a circular buffer. When an assertion
|
|
occurs, the recorded event history will be printed to help trace the sequence
|
|
of events leading to the failure.
|
|
|
|
config IEEE802154_RECORD_EVENT_SIZE
|
|
int "Record event table size"
|
|
depends on IEEE802154_RECORD_EVENT
|
|
range 1 50
|
|
default 30
|
|
help
|
|
Size of the circular buffer for recording events. Larger values provide
|
|
more history but consume more memory.
|
|
|
|
config IEEE802154_RECORD_STATE
|
|
bool "Enable record state information for debugging"
|
|
depends on IEEE802154_RECORD
|
|
default n
|
|
help
|
|
Record IEEE 802.15.4 driver state transitions in a circular buffer.
|
|
When an assertion occurs, the recorded state history will be printed
|
|
to show the sequence of state changes.
|
|
|
|
config IEEE802154_RECORD_STATE_SIZE
|
|
int "Record state table size"
|
|
depends on IEEE802154_RECORD_STATE
|
|
range 1 50
|
|
default 10
|
|
help
|
|
Size of the circular buffer for recording state transitions. Larger values
|
|
provide more history but consume more memory.
|
|
|
|
config IEEE802154_RECORD_CMD
|
|
bool "Enable record command information for debugging"
|
|
depends on IEEE802154_RECORD
|
|
default n
|
|
help
|
|
Record IEEE 802.15.4 driver commands in a circular buffer. When an assertion
|
|
occurs, the recorded command history will be printed to show what commands
|
|
were issued before the failure.
|
|
|
|
config IEEE802154_RECORD_CMD_SIZE
|
|
int "Record command table size"
|
|
depends on IEEE802154_RECORD_CMD
|
|
range 1 50
|
|
default 10
|
|
help
|
|
Size of the circular buffer for recording commands. Larger values provide
|
|
more history but consume more memory.
|
|
|
|
config IEEE802154_RECORD_ABORT
|
|
bool "Enable record abort information for debugging"
|
|
depends on IEEE802154_RECORD
|
|
default n
|
|
help
|
|
Record IEEE 802.15.4 operation aborts in a circular buffer. When an assertion
|
|
occurs, the recorded abort history will be printed to show what operations
|
|
were aborted before the failure.
|
|
|
|
config IEEE802154_RECORD_ABORT_SIZE
|
|
int "Record abort table size"
|
|
depends on IEEE802154_RECORD_ABORT
|
|
range 1 50
|
|
default 10
|
|
help
|
|
Size of the circular buffer for recording aborts. Larger values provide
|
|
more history but consume more memory.
|
|
|
|
config IEEE802154_RECORD_TXRX_FRAME
|
|
bool "Enable record txrx packets for debugging"
|
|
default n
|
|
help
|
|
Record transmitted and received IEEE 802.15.4 frames in a circular buffer.
|
|
When an assertion occurs, the recorded frame history will be printed to
|
|
help diagnose frame-level issues. Note: This can consume significant memory
|
|
depending on frame size and buffer size.
|
|
|
|
config IEEE802154_RECORD_TXRX_FRAME_SIZE
|
|
int "Record frame table size"
|
|
depends on IEEE802154_RECORD_TXRX_FRAME
|
|
range 1 50
|
|
default 15
|
|
help
|
|
Size of the circular buffer for recording frames. Larger values provide
|
|
more frame history but consume significantly more memory (each frame can
|
|
be up to 127 bytes plus metadata).
|
|
|
|
config IEEE802154_TXRX_STATISTIC
|
|
bool "Enable record tx/rx packets information for debugging"
|
|
default n
|
|
help
|
|
Enable collection of transmit and receive packet statistics. This tracks
|
|
counts, errors, and other metrics for transmitted and received frames.
|
|
Statistics can be accessed via debug APIs for performance analysis.
|
|
|
|
config IEEE802154_PRINT_PHY_REG
|
|
bool "Enable print IEEE802154 PHY register command"
|
|
default n
|
|
help
|
|
Enable the 'phyreg' console command to print IEEE 802.15.4 PHY register
|
|
information for debugging purposes. This command displays register values
|
|
and configuration settings of the IEEE 802.15.4 hardware.
|
|
|
|
endmenu # IEEE 802.15.4 Debug Parameters
|
|
|
|
endmenu # IEEE 802.15.4
|