Merge branch 'all-devices/c6' into 'main'

Add c6 support on all-device-types-app

See merge request app-frameworks/esp-matter!748

examples/all_device_types_app/CMakeLists.txt

@@ -15,6 +15,8 @@ if(NOT DEFINED ENV{ESP_MATTER_DEVICE_PATH})
         set(ENV{ESP_MATTER_DEVICE_PATH} $ENV{ESP_MATTER_PATH}/device_hal/device/esp32h2_devkit_c)
     elseif("${IDF_TARGET}" STREQUAL "esp32c2")
 	set(ENV{ESP_MATTER_DEVICE_PATH} $ENV{ESP_MATTER_PATH}/device_hal/device/esp32c2_devkit_m)
+    elseif("${IDF_TARGET}" STREQUAL "esp32c6")
+        set(ENV{ESP_MATTER_DEVICE_PATH} $ENV{ESP_MATTER_PATH}/device_hal/device/esp32c6_devkit_c)
     else()
         message(FATAL_ERROR "Unsupported IDF_TARGET")
     endif()

examples/all_device_types_app/main/app_main.cpp

@@ -12,7 +12,6 @@
 
 #include <esp_matter.h>
 #include <esp_matter_console.h>
-#include <esp_matter_ota.h>
 
 #include <common_macros.h>
 #include <app_priv.h>

examples/all_device_types_app/main/esp_matter_console_helpers.cpp

@@ -16,6 +16,10 @@
 #include "esp_vfs_fat.h"
 #include "hal/uart_types.h"
 #include "driver/uart.h"
+#if CONFIG_ESP_CONSOLE_USB_SERIAL_JTAG
+#include "esp_vfs_usb_serial_jtag.h"
+#include "driver/usb_serial_jtag.h"
+#endif // CONFIG_ESP_CONSOLE_USB_SERIAL_JTAG
 #include <helpers.h>
 #include <device_types.h>
 #include <string.h>

examples/all_device_types_app/sdkconfig.defaults.esp32c6

@@ -0,0 +1,52 @@
+CONFIG_IDF_TARGET="esp32c6"
+
+# libsodium
+CONFIG_LIBSODIUM_USE_MBEDTLS_SHA=y
+
+# NIMBLE
+CONFIG_BT_ENABLED=y
+CONFIG_BT_NIMBLE_ENABLED=y
+CONFIG_BT_NIMBLE_EXT_ADV=n
+CONFIG_BT_NIMBLE_HCI_EVT_BUF_SIZE=70
+CONFIG_USE_BLE_ONLY_FOR_COMMISSIONING=y
+
+# FreeRTOS should use legacy API
+CONFIG_FREERTOS_ENABLE_BACKWARD_COMPATIBILITY=y
+
+# Disable lwip ipv6 autoconfig
+CONFIG_LWIP_IPV6_AUTOCONFIG=y
+
+# Use a custom partition table
+CONFIG_PARTITION_TABLE_CUSTOM=y
+CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions.csv"
+
+# Use minimal mDNS
+CONFIG_USE_MINIMAL_MDNS=y
+CONFIG_ENABLE_EXTENDED_DISCOVERY=y
+
+# Enable OTA Requestor
+CONFIG_ENABLE_OTA_REQUESTOR=y
+
+# Disable AP
+CONFIG_ENABLE_WIFI_STATION=y
+CONFIG_ENABLE_WIFI_AP=n
+
+# Button
+CONFIG_BUTTON_PERIOD_TIME_MS=20
+CONFIG_BUTTON_LONG_PRESS_TIME_MS=5000
+
+# Enable chip shell
+CONFIG_ENABLE_CHIP_SHELL=y
+
+# ESP32-C6-DevKitM-1 Settings
+# Buttons
+CONFIG_BSP_BUTTONS_NUM=1
+CONFIG_BSP_BUTTON_1_TYPE_GPIO=y
+CONFIG_BSP_BUTTON_1_GPIO=9
+CONFIG_BSP_BUTTON_1_LEVEL=0
+# LEDs
+CONFIG_BSP_LEDS_NUM=1
+CONFIG_BSP_LED_TYPE_RGB=y
+CONFIG_BSP_LED_RGB_GPIO=8
+CONFIG_BSP_LED_RGB_BACKEND_RMT=y
+