Chirag Atal
b4d240e4a1
Adding constructors to structs for default values of the cluster configs. esp_matter_command: Removing the support for custom command callbacks and instead using the standard command callback itself. Also some other minor changes to make it easier for the application to use the standard command callback.
RainMaker Light Example
Building and Flashing the Firmware
See the README.md file for more information about building and flashing the firmware.
What to expect in this example?
This example showcases integration of ESP RainMaker with a Matter light device. ESP RainMaker is an end-to-end solution offered by Espressif to enable remote control and monitoring for ESP32 based products without any configuration required in the Cloud. Please refer the ESP RainMaker documentation here for more details.
Supported features:
- Matter Commissioning
- RainMaker Claiming and User-Node Association
- On/Off, Brightness and Color (on ESP32-C3 for now) control over RainMaker app as well as Matter Controller
- Updates through RainMaker reflected over Matter and vice versa
Make sure to follow these additional steps along with the steps in the top level README.
Getting the Repositories
This only needs to be done once:
$ git clone --recursive https://github.com/espressif/esp-rainmaker.git
Setup the RainMaker CLI from here: https://rainmaker.espressif.com/docs/cli-setup.html
Configuring the environment
This needs to be done everytime a new terminal is opened:
cd esp-matter/examples/rainmaker_light/
export ESP_RMAKER_PATH=/path/to/esp-rainmaker
RainMaker Claiming
If self-claiming is not enabled/supported, this need to be done before flashing the firmware.
RainMaker CLI:
$ cd $ESP_RMAKER_PATH/cli
$ rainmaker.py claim --addr 0x3E0000 $ESPPORT
RainMaker User-Node Association
This needs to be done after commissioning.
Check if the device already has user node association done, using the custom RainMaker cluster (cluster_id: 0xc00):
$ ./out/debug/chip-tool any read-by-id 0xc00 0x0 0x1 0x0
- If the above custom status attribute (attribute_id: 0x0) returns true, the association has already been done.
- If the attribute returns false, the association has not been done. And the below custom configuration command (command_id: 0x0) can be used to do the association.
RainMaker CLI:
Get the details: This will print the user_id and secret_key (do not close this):
$ rainmaker.py test --addnode <node-id>
>> add-user <user-id> <secret-key>
Prepare the command payload: Use the above details.
payload: <user_id>::<secret_key>
Now use the payload to run the RainMaker configuration command from chip-tool:
$ ./out/debug/chip-tool any command-by-id 0xc00 0x0 '"<user_id>::<secret_key>"' 0x1 0x0
The device/node should now be associated with the user.