mirror of https://github.com/espressif/esp-matter.git synced 2026-04-27 19:13:13 +00:00

Files

T

Chirag Atal 2f41c1d7a1 submodule: Updating submodule to current master (commit id: 10b804696)

esp_matter_command: Removing the response commands support. This is now managed internally for each command separately.
esp_matter_command: Adding another flag for commands. This is used to generate the command lists.
esp_matter_core: Add support for client generated and server generated command lists in clusters.
esp_matter_core: Add support for data versions for endpoints and minor restructuring.
esp_matter_core: Add support to lock and unlock chip_stack. Using this lock in esp_matter_attribute for reading and writing attributes.
esp_matter_client: Binding changes.
esp_matter_cluster: Changing binding commands to binding attribute.
esp_matter_cluster: Adding the clusters/attributes/commands which were 'not implemented' before and are supported now.

esp_matter_cluster: Minor renames.
esp_matter_attribute: Minor changes.
esp_matter_ota: Minor changes.

zap-generated: Removing CHIPClusters.cpp and CHIPClientCallbacks.cpp and updating their corresponding header files.
zap-generated: Minor changes in gen_config.h, callback-stub.cpp and endpoint_config.h.
zap-generated: Added new empty files to prevent cmake warnings.
zap-generated: Updated zap_light's zap-generated.

2022-03-15 14:42:38 +05:30

main

submodule: Updating submodule to current master (commit id: 10b804696)

2022-03-15 14:42:38 +05:30

CMakeLists.txt

Add switch example to control remote device (light)

2022-02-07 17:58:14 +00:00

partitions_h2.csv

Add switch example to control remote device (light)

2022-02-07 17:58:14 +00:00

partitions.csv

Add switch example to control remote device (light)

2022-02-07 17:58:14 +00:00

README.md

Update switch readme

2022-03-10 15:18:17 +05:30

sdkconfig.defaults

Add switch example to control remote device (light)

2022-02-07 17:58:14 +00:00

sdkconfig.defaults.esp32h2

Add switch example to control remote device (light)

2022-02-07 17:58:14 +00:00

sdkconfig.defaults.esp32s2

Add switch example to control remote device (light)

2022-02-07 17:58:14 +00:00

README.md

Switch Example

Building and Flashing the Firmware

Commissioning using chip-tool

Pair a device over BLE

Commission switch and light using chip-tool

Command:

./out/debug/chip-tool pairing ble-wifi node-id SSID PSK SETUP_PINCODE DISCRIMINATOR

for switch SETUP_PINCODE = 20212020 DISCRIMINATOR = 240 (0xF0)

See the README.md file for more information about building and flashing the firmware.

What to expect in this example?

Supported features:

Matter Commissioning
Switch will connect to light when Bind command is sent
CLIs to control remote light from switch

Bind light to switch

Send Bind command from chip tool to switch which adds entry of remote device (light) in binding table.

 ./out/debug/chip-tool binding bind RemoteNodeId RemoteGroupId RemoteEndpointId RemoteClusterId node-id endpoint-id

e.g.

./out/debug/chip-tool binding bind 12344322 0 1 6 12344321 1

note:

12344321 : node Id of switch used during commissioning
12344322 : node Id of light used during commissioning
Cluster Id for OnOff cluster is 6
binding cluster is currently present on endpoint 1

When bind command is sent switch will establish a CASE Session with light. After bind command on chip tool returns success, wait for 5-10 seconds until you see CASE Session established message in logs on switch side.

Useful shell commands

After the binding is successful you can send the following command to control light from switch

> matter esp driver send_bind <endpoint_id> <cluster_id> <command_id>

here, endpoint_id, cluster_id, command_id of switch must be given in hex format

e.g.

Power Off command

> matter esp driver send_bind 0x0001 0x0006 0x0000

Power On command

> matter esp driver send_bind 0x0001 0x0006 0x0001

Toggle command

>  matter esp driver send_bind 0x0001 0x0006 0x0002