code splitting

Signed-off-by: Peter Siegmund <mars3142@users.noreply.github.com>

main/CMakeLists.txt

@@ -1,4 +1,6 @@
-idf_component_register(SRCS "main.c"
+idf_component_register(SRCS 
+                        "beacon.c"
+                        "main.c"
                     INCLUDE_DIRS "."
 )
 spiffs_create_partition_image(storage ../data FLASH_IN_PROJECT)

main/beacon.c

@@ -0,0 +1,181 @@
+#include "beacon.h"
+
+#include "driver/gpio.h"
+#include "driver/gptimer.h"
+#include "esp_log.h"
+#include "freertos/FreeRTOS.h"
+#include "freertos/task.h"
+#include "inttypes.h"
+
+static const char *TAG = "beacon";
+
+typedef struct
+{
+    uint32_t tick;
+} timer_event_t;
+
+static QueueHandle_t timer_evt_queue = NULL;
+gptimer_handle_t gptimer = NULL;
+
+bool IRAM_ATTR timer_callback(gptimer_handle_t timer, const gptimer_alarm_event_data_t *edata, void *user_ctx)
+{
+    timer_event_t evt = {.tick = edata->count_value};
+
+    BaseType_t high_task_wakeup = pdFALSE;
+    xQueueSendFromISR(timer_evt_queue, &evt, &high_task_wakeup);
+
+    return (high_task_wakeup == pdTRUE);
+}
+
+void timer_event_task(void *arg)
+{
+    timer_event_t evt;
+    while (true)
+    {
+        if (xQueueReceive(timer_evt_queue, &evt, portMAX_DELAY))
+        {
+            static bool level = false;
+            level = !level;
+            gpio_set_level(CONFIG_WLED_DIN_PIN, level);
+            ESP_LOGI(TAG, "Timer Event: count = %" PRIu32 ", GPIO now %s", evt.tick, level ? "HIGH" : "LOW");
+        }
+    }
+}
+
+esp_err_t wled_init(void)
+{
+    gpio_config_t io_conf = {.pin_bit_mask = (1ULL << CONFIG_WLED_DIN_PIN),
+                             .mode = GPIO_MODE_OUTPUT,
+                             .pull_up_en = GPIO_PULLUP_DISABLE,
+                             .pull_down_en = GPIO_PULLDOWN_DISABLE,
+                             .intr_type = GPIO_INTR_DISABLE};
+    esp_err_t ret = gpio_config(&io_conf);
+    if (ret != ESP_OK)
+    {
+        ESP_LOGE(TAG, "Failed to configure GPIO: %s", esp_err_to_name(ret));
+    }
+    return ret;
+}
+
+esp_err_t beacon_start(void)
+{
+    if (gptimer == NULL)
+    {
+        ESP_LOGE(TAG, "GPTimer not initialized");
+        return ESP_ERR_INVALID_STATE;
+    }
+    esp_err_t ret = gptimer_start(gptimer);
+    if (ret != ESP_OK)
+    {
+        ESP_LOGE(TAG, "Failed to start gptimer: %s", esp_err_to_name(ret));
+    }
+    else
+    {
+        ESP_LOGI(TAG, "GPTimer started.");
+    }
+    return ret;
+}
+
+esp_err_t beacon_stop(void)
+{
+    if (gptimer == NULL)
+    {
+        ESP_LOGE(TAG, "GPTimer not initialized");
+        return ESP_ERR_INVALID_STATE;
+    }
+    esp_err_t ret = gptimer_stop(gptimer);
+    if (ret != ESP_OK)
+    {
+        ESP_LOGE(TAG, "Failed to stop gptimer: %s", esp_err_to_name(ret));
+    }
+    else
+    {
+        ESP_LOGI(TAG, "GPTimer stopped.");
+    }
+    return ret;
+}
+
+esp_err_t beacon_init(void)
+{
+    esp_err_t ret = ESP_OK;
+
+    timer_evt_queue = xQueueCreate(10, sizeof(timer_event_t));
+    if (timer_evt_queue == NULL)
+    {
+        ESP_LOGE(TAG, "Failed to create timer event queue");
+        ret = ESP_ERR_NO_MEM;
+        goto exit;
+    }
+
+    gptimer_config_t timer_config = {
+        .clk_src = GPTIMER_CLK_SRC_DEFAULT,
+        .direction = GPTIMER_COUNT_UP,
+        .resolution_hz = 1000000, // 1 MHz = 1 µs
+    };
+    ret = gptimer_new_timer(&timer_config, &gptimer);
+    if (ret != ESP_OK)
+    {
+        ESP_LOGE(TAG, "Failed to create new gptimer: %s", esp_err_to_name(ret));
+        goto cleanup_queue;
+    }
+
+    gptimer_event_callbacks_t callbacks = {
+        .on_alarm = timer_callback,
+    };
+    ret = gptimer_register_event_callbacks(gptimer, &callbacks, NULL);
+    if (ret != ESP_OK)
+    {
+        ESP_LOGE(TAG, "Failed to register timer callbacks: %s", esp_err_to_name(ret));
+        goto cleanup_timer;
+    }
+
+    ret = gptimer_enable(gptimer);
+    if (ret != ESP_OK)
+    {
+        ESP_LOGE(TAG, "Failed to enable gptimer: %s", esp_err_to_name(ret));
+        goto cleanup_timer; // Timer created but not enabled, can be deleted.
+    }
+
+    gptimer_alarm_config_t alarm_config = {
+        .alarm_count = 2000000, // 2.000.000 µs = 2 secs
+        .reload_count = 0,
+        .flags.auto_reload_on_alarm = true,
+    };
+    ret = gptimer_set_alarm_action(gptimer, &alarm_config);
+    if (ret != ESP_OK)
+    {
+        ESP_LOGE(TAG, "Failed to set gptimer alarm action: %s", esp_err_to_name(ret));
+        goto cleanup_enabled_timer; // Timer is enabled, disable before deleting.
+    }
+
+    BaseType_t task_created = xTaskCreate(timer_event_task, "timer_event_task", 4096, NULL, 10, NULL);
+    if (task_created != pdPASS)
+    {
+        ESP_LOGE(TAG, "Failed to create timer event task");
+        ret = ESP_ERR_NO_MEM; // Task creation often fails due to insufficient memory
+        goto cleanup_enabled_timer;
+    }
+
+    ESP_LOGI(TAG, "Beacon module initialized.");
+    goto exit;
+
+cleanup_enabled_timer:
+    if (gptimer)
+    {
+        gptimer_disable(gptimer); // Attempt to disable
+    }
+cleanup_timer:
+    if (gptimer)
+    {
+        gptimer_del_timer(gptimer);
+        gptimer = NULL;
+    }
+cleanup_queue:
+    if (timer_evt_queue)
+    {
+        vQueueDelete(timer_evt_queue);
+        timer_evt_queue = NULL;
+    }
+exit:
+    return ret;
+}

main/beacon.h

@@ -0,0 +1,8 @@
+#pragma once
+
+#include "esp_err.h"
+
+esp_err_t beacon_init(void);
+esp_err_t beacon_start(void);
+esp_err_t beacon_stop(void);
+esp_err_t wled_init(void);

main/main.c

@@ -1,3 +1,8 @@
+#include "beacon.h"
+
 void app_main(void)
 {
+    ESP_ERROR_CHECK(beacon_init());
+    ESP_ERROR_CHECK(wled_init());
+    ESP_ERROR_CHECK(beacon_start());
 }