Merge branch 'feat/esp32s31-rmt-support' into 'master'

feat(rmt): enable RMT support on esp32s31

Closes IDF-14794

See merge request espressif/esp-idf!47152

components/bootloader_support/src/esp32s31/flash_encryption_secure_features.c

@@ -11,9 +11,9 @@
 #include "esp_log.h"
 #include "sdkconfig.h"
 
- ESP_LOG_ATTR_TAG(TAG, "secure_boot");
+ESP_LOG_ATTR_TAG(TAG, "flash_encrypt");
 
- esp_err_t esp_secure_boot_enable_secure_features(void)
+esp_err_t esp_flash_encryption_enable_secure_features(void)
 {
     esp_efuse_write_field_bit(ESP_EFUSE_DIS_DIRECT_BOOT);
 

components/esp_driver_rmt/test_apps/rmt/README.md

@@ -1,2 +1,2 @@
-| Supported Targets | ESP32 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-H2 | ESP32-H21 | ESP32-H4 | ESP32-P4 | ESP32-S2 | ESP32-S3 |
-| ----------------- | ----- | -------- | -------- | -------- | -------- | --------- | -------- | -------- | -------- | -------- |
+| Supported Targets | ESP32 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-H2 | ESP32-H21 | ESP32-H4 | ESP32-P4 | ESP32-S2 | ESP32-S3 | ESP32-S31 |
+| ----------------- | ----- | -------- | -------- | -------- | -------- | --------- | -------- | -------- | -------- | -------- | --------- |

components/esp_driver_rmt/test_apps/rmt/pytest_rmt.py

@@ -14,7 +14,9 @@ from pytest_embedded_idf.utils import idf_parametrize
     ],
     indirect=True,
 )
-@idf_parametrize('target', ['esp32', 'esp32s2', 'esp32c3', 'esp32c6', 'esp32h2', 'esp32p4'], indirect=['target'])
+@idf_parametrize(
+    'target', ['esp32', 'esp32s2', 'esp32c3', 'esp32c6', 'esp32h2', 'esp32p4', 'esp32s31'], indirect=['target']
+)
 def test_rmt(dut: Dut) -> None:
     dut.run_all_single_board_cases()
 

components/esp_driver_rmt/test_apps/rmt/sdkconfig.defaults.esp32s31

@@ -0,0 +1,2 @@
+CONFIG_SPIRAM=y
+CONFIG_SPIRAM_MALLOC_ALWAYSINTERNAL=0

components/esp_hal_rmt/esp32c3/include/hal/rmt_ll.h

@@ -54,7 +54,6 @@ extern "C" {
 // Maximum values due to limited register bit width
 #define RMT_LL_CHANNEL_CLOCK_MAX_PRESCALE 256
 #define RMT_LL_GROUP_CLOCK_MAX_INTEGER_PRESCALE 256
-#define RMT_LL_GROUP_CLOCK_MAX_FRACTAL_PRESCALE 64
 
 typedef enum {
     RMT_LL_MEM_OWNER_SW = 0,

components/esp_hal_rmt/esp32c5/include/hal/rmt_ll.h

@@ -55,7 +55,6 @@ extern "C" {
 // Maximum values due to limited register bit width
 #define RMT_LL_CHANNEL_CLOCK_MAX_PRESCALE 256
 #define RMT_LL_GROUP_CLOCK_MAX_INTEGER_PRESCALE 256
-#define RMT_LL_GROUP_CLOCK_MAX_FRACTAL_PRESCALE 64
 
 typedef enum {
     RMT_LL_MEM_OWNER_SW = 0,

components/esp_hal_rmt/esp32c6/include/hal/rmt_ll.h

@@ -55,7 +55,6 @@ extern "C" {
 // Maximum values due to limited register bit width
 #define RMT_LL_CHANNEL_CLOCK_MAX_PRESCALE 256
 #define RMT_LL_GROUP_CLOCK_MAX_INTEGER_PRESCALE 256
-#define RMT_LL_GROUP_CLOCK_MAX_FRACTAL_PRESCALE 64
 
 typedef enum {
     RMT_LL_MEM_OWNER_SW = 0,

components/esp_hal_rmt/esp32h2/include/hal/rmt_ll.h

@@ -55,7 +55,6 @@ extern "C" {
 // Maximum values due to limited register bit width
 #define RMT_LL_CHANNEL_CLOCK_MAX_PRESCALE 256
 #define RMT_LL_GROUP_CLOCK_MAX_INTEGER_PRESCALE 256
-#define RMT_LL_GROUP_CLOCK_MAX_FRACTAL_PRESCALE 64
 
 typedef enum {
     RMT_LL_MEM_OWNER_SW = 0,

components/esp_hal_rmt/esp32h21/include/hal/rmt_ll.h

@@ -55,7 +55,6 @@ extern "C" {
 // Maximum values due to limited register bit width
 #define RMT_LL_CHANNEL_CLOCK_MAX_PRESCALE 256
 #define RMT_LL_GROUP_CLOCK_MAX_INTEGER_PRESCALE 256
-#define RMT_LL_GROUP_CLOCK_MAX_FRACTAL_PRESCALE 64
 
 typedef enum {
     RMT_LL_MEM_OWNER_SW = 0,

components/esp_hal_rmt/esp32h4/include/hal/rmt_ll.h

@@ -55,7 +55,6 @@ extern "C" {
 // Maximum values due to limited register bit width
 #define RMT_LL_CHANNEL_CLOCK_MAX_PRESCALE 256
 #define RMT_LL_GROUP_CLOCK_MAX_INTEGER_PRESCALE 256
-#define RMT_LL_GROUP_CLOCK_MAX_FRACTAL_PRESCALE 64
 
 typedef enum {
     RMT_LL_MEM_OWNER_SW = 0,

components/esp_hal_rmt/esp32p4/include/hal/rmt_ll.h

@@ -54,7 +54,6 @@ extern "C" {
 // Maximum values due to limited register bit width
 #define RMT_LL_CHANNEL_CLOCK_MAX_PRESCALE 256
 #define RMT_LL_GROUP_CLOCK_MAX_INTEGER_PRESCALE 256
-#define RMT_LL_GROUP_CLOCK_MAX_FRACTAL_PRESCALE 64
 
 typedef enum {
     RMT_LL_MEM_OWNER_SW = 0,

components/esp_hal_rmt/esp32s3/include/hal/rmt_ll.h

@@ -54,7 +54,6 @@ extern "C" {
 // Maximum values due to limited register bit width
 #define RMT_LL_CHANNEL_CLOCK_MAX_PRESCALE 256
 #define RMT_LL_GROUP_CLOCK_MAX_INTEGER_PRESCALE 256
-#define RMT_LL_GROUP_CLOCK_MAX_FRACTAL_PRESCALE 64
 
 typedef enum {
     RMT_LL_MEM_OWNER_SW = 0,

components/esp_hal_rmt/esp32s31/include/hal/rmt_ll.h

@@ -0,0 +1,816 @@
+/*
+ * SPDX-FileCopyrightText: 2026 Espressif Systems (Shanghai) CO LTD
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+/**
+* @note TX and RX channels are index from 0 in the LL driver, i.e. tx_channel = [0,3], rx_channel = [0,3]
+*/
+
+#pragma once
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <stddef.h>
+#include "hal/misc.h"
+#include "hal/assert.h"
+#include "hal/rmt_types.h"
+#include "soc/rmt_struct.h"
+#include "soc/hp_sys_clkrst_struct.h"
+#include "soc/hp_system_struct.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+// Get RMT attribute
+#define RMT_LL_GET(_attr)                 (RMT_LL_ ## _attr)
+#define RMT_LL_SUPPORT(_feat)             (RMT_LL_SUPPORT_ ## _feat)
+
+// SoC-based capabilities
+#define RMT_LL_INST_NUM                       (1)  /*!< Number of RMT group */
+#define RMT_LL_TX_CANDIDATES_PER_INST         (4)  /*!< Number of channels that capable of Transmit in each group */
+#define RMT_LL_RX_CANDIDATES_PER_INST         (4)  /*!< Number of channels that capable of Receive in each group */
+#define RMT_LL_CHANS_PER_INST                 (8)  /*!< Total 8 channels */
+#define RMT_LL_SUPPORT_RX_DEMODULATION        (1)  /*!< Support signal demodulation on RX path (i.e. remove carrier) */
+#define RMT_LL_SUPPORT_ASYNC_STOP             (1)  /*!< Support stop transmission asynchronously */
+#define RMT_LL_SUPPORT_TX_SYNCHRO             (1)  /*!< Support coordinate a group of TX channels to start simultaneously */
+#define RMT_LL_SUPPORT_RC_FAST                (1)  /*!< Support set RC_FAST clock as the RMT clock source */
+
+#define RMT_LL_EVENT_TX_DONE(channel)     (1 << (channel))
+#define RMT_LL_EVENT_TX_THRES(channel)    (1 << ((channel) + 8))
+#define RMT_LL_EVENT_TX_LOOP_END(channel) (1 << ((channel) + 12))
+#define RMT_LL_EVENT_TX_ERROR(channel)    (1 << ((channel) + 4))
+#define RMT_LL_EVENT_RX_DONE(channel)     (1 << ((channel) + 16))
+#define RMT_LL_EVENT_RX_THRES(channel)    (1 << ((channel) + 24))
+#define RMT_LL_EVENT_RX_ERROR(channel)    (1 << ((channel) + 20))
+#define RMT_LL_EVENT_TX_MASK(channel)     (RMT_LL_EVENT_TX_DONE(channel) | RMT_LL_EVENT_TX_THRES(channel) | RMT_LL_EVENT_TX_LOOP_END(channel))
+#define RMT_LL_EVENT_RX_MASK(channel)     (RMT_LL_EVENT_RX_DONE(channel) | RMT_LL_EVENT_RX_THRES(channel))
+
+#define RMT_LL_MAX_LOOP_COUNT_PER_BATCH   1023
+#define RMT_LL_MAX_FILTER_VALUE           255
+#define RMT_LL_MAX_IDLE_VALUE             32767
+
+// Maximum values due to limited register bit width
+#define RMT_LL_CHANNEL_CLOCK_MAX_PRESCALE 256
+#define RMT_LL_GROUP_CLOCK_MAX_INTEGER_PRESCALE 256
+
+typedef enum {
+    RMT_LL_MEM_OWNER_SW = 0,
+    RMT_LL_MEM_OWNER_HW = 1,
+} rmt_ll_mem_owner_t;
+
+typedef enum {
+    RMT_LL_MEM_LP_MODE_DEEP_SLEEP,    // memory will enter deep sleep during low power stage, keep memory data
+    RMT_LL_MEM_LP_MODE_LIGHT_SLEEP,   // memory will enter light sleep during low power stage, keep memory data
+    RMT_LL_MEM_LP_MODE_SHUT_DOWN,     // memory will be powered down during low power stage
+    RMT_LL_MEM_LP_MODE_DISABLE,       // disable the low power stage
+} rmt_ll_mem_lp_mode_t;
+
+/**
+ * @brief Enable the bus clock for RMT module
+ *
+ * @param group_id Group ID
+ * @param enable true to enable, false to disable
+ */
+static inline void rmt_ll_enable_bus_clock(int group_id, bool enable)
+{
+    (void)group_id;
+    HP_SYS_CLKRST.rmt_ctrl0.reg_rmt_sys_clk_en = enable;
+}
+
+/**
+ * @brief Reset the RMT module
+ *
+ * @param group_id Group ID
+ */
+static inline void rmt_ll_reset_register(int group_id)
+{
+    (void)group_id;
+    HP_SYS_CLKRST.rmt_ctrl0.reg_rmt_rst_en = 1;
+    HP_SYS_CLKRST.rmt_ctrl0.reg_rmt_rst_en = 0;
+}
+
+/**
+ * @brief Force power on the RMT memory block, regardless of the outside PMU logic
+ *
+ * @param dev Peripheral instance address
+ */
+static inline void rmt_ll_mem_force_power_on(rmt_dev_t *dev)
+{
+    (void)dev;
+    HP_SYSTEM.sys_rmt_mem_lp_ctrl.sys_rmt_mem_lp_force_ctrl = 1;
+    HP_SYSTEM.sys_rmt_mem_lp_ctrl.sys_rmt_mem_lp_en = 0;
+}
+
+/**
+ * @brief Force the RMT memory block into low power mode, regardless of the outside PMU logic
+ *
+ * @param dev Peripheral instance address
+ */
+static inline void rmt_ll_mem_force_low_power(rmt_dev_t *dev)
+{
+    (void)dev;
+    HP_SYSTEM.sys_rmt_mem_lp_ctrl.sys_rmt_mem_lp_force_ctrl = 1;
+    HP_SYSTEM.sys_rmt_mem_lp_ctrl.sys_rmt_mem_lp_en = 1;
+}
+
+/**
+ * @brief Power control the RMT memory block by the outside PMU logic
+ *
+ * @param dev Peripheral instance address
+ * @param mode RMT memory low power mode in low power stage
+ */
+static inline void rmt_ll_mem_power_by_pmu(rmt_dev_t *dev)
+{
+    (void)dev;
+    HP_SYSTEM.sys_rmt_mem_lp_ctrl.sys_rmt_mem_lp_en = 0;
+    HP_SYSTEM.sys_rmt_mem_lp_ctrl.sys_rmt_mem_lp_force_ctrl = 0;
+}
+
+/**
+ * @brief Set low power mode for RMT memory block
+ *
+ * @param dev Peripheral instance address
+ * @param mode RMT memory low power mode in low power stage
+ */
+static inline void rmt_ll_mem_set_low_power_mode(rmt_dev_t *dev, rmt_ll_mem_lp_mode_t mode)
+{
+    (void)dev;
+    HP_SYSTEM.sys_rmt_mem_lp_ctrl.sys_rmt_mem_lp_mode = mode;
+}
+
+/**
+ * @brief Enable APB accessing RMT memory in nonfifo mode
+ *
+ * @param dev Peripheral instance address
+ * @param enable True to enable, False to disable
+ */
+static inline void rmt_ll_enable_mem_access_nonfifo(rmt_dev_t *dev, bool enable)
+{
+    dev->sys_conf.apb_fifo_mask = enable;
+}
+
+/**
+ * @brief Set clock source and divider for RMT channel group
+ *
+ * @param dev Peripheral instance address
+ * @param channel not used as clock source is set for all channels
+ * @param src Clock source
+ * @param divider_integral Integral part of the divider
+ * @param divider_denominator Denominator part of the divider
+ * @param divider_numerator Numerator part of the divider
+ */
+static inline void rmt_ll_set_group_clock_src(rmt_dev_t *dev, uint32_t channel, rmt_clock_source_t src,
+                                              uint32_t divider_integral, uint32_t divider_denominator, uint32_t divider_numerator)
+{
+    (void)dev;
+    // Formula: rmt_sclk = module_clock_src / (1 + div_num + div_a / div_b)
+    (void)channel; // the source clock is set for all channels
+    HAL_ASSERT(divider_integral >= 1);
+    HAL_FORCE_MODIFY_U32_REG_FIELD(HP_SYS_CLKRST.rmt_ctrl0, reg_rmt_clk_div_num, divider_integral - 1);
+    HAL_FORCE_MODIFY_U32_REG_FIELD(HP_SYS_CLKRST.rmt_ctrl0, reg_rmt_clk_div_numerator, divider_numerator);
+    HAL_FORCE_MODIFY_U32_REG_FIELD(HP_SYS_CLKRST.rmt_ctrl0, reg_rmt_clk_div_denominator, divider_denominator);
+    switch (src) {
+    case RMT_CLK_SRC_PLL_F80M:
+        HP_SYS_CLKRST.rmt_ctrl0.reg_rmt_clk_src_sel = 2;
+        break;
+    case RMT_CLK_SRC_RC_FAST:
+        HP_SYS_CLKRST.rmt_ctrl0.reg_rmt_clk_src_sel = 1;
+        break;
+    case RMT_CLK_SRC_XTAL:
+        HP_SYS_CLKRST.rmt_ctrl0.reg_rmt_clk_src_sel = 0;
+        break;
+    default:
+        HAL_ASSERT(false);
+        break;
+    }
+}
+
+/**
+ * @brief Enable RMT peripheral source clock
+ *
+ * @param dev Peripheral instance address
+ * @param en True to enable, False to disable
+ */
+static inline void rmt_ll_enable_group_clock(rmt_dev_t *dev, bool en)
+{
+    (void)dev;
+    HP_SYS_CLKRST.rmt_ctrl0.reg_rmt_clk_en = en;
+}
+
+////////////////////////////////////////TX Channel Specific/////////////////////////////////////////////////////////////
+
+/**
+ * @brief Reset clock divider for TX channels by mask
+ *
+ * @param dev Peripheral instance address
+ * @param channel_mask Mask of TX channels
+ */
+static inline void rmt_ll_tx_reset_channels_clock_div(rmt_dev_t *dev, uint32_t channel_mask)
+{
+    // write 1 to reset
+    dev->ref_cnt_rst.val |= channel_mask & 0x0F;
+}
+
+/**
+ * @brief Set TX channel clock divider
+ *
+ * @param dev Peripheral instance address
+ * @param channel RMT TX channel number
+ * @param div Division value
+ */
+static inline void rmt_ll_tx_set_channel_clock_div(rmt_dev_t *dev, uint32_t channel, uint32_t div)
+{
+    HAL_ASSERT(div >= 1 && div <= 256 && "divider out of range");
+    // limit the maximum divider to 256
+    if (div >= 256) {
+        div = 0; // 0 means 256 division
+    }
+    HAL_FORCE_MODIFY_U32_REG_FIELD(dev->chnconf0[channel], div_cnt_chn, div);
+}
+
+/**
+ * @brief Reset RMT reading pointer for TX channel
+ *
+ * @param dev Peripheral instance address
+ * @param channel RMT TX channel number
+ */
+__attribute__((always_inline))
+static inline void rmt_ll_tx_reset_pointer(rmt_dev_t *dev, uint32_t channel)
+{
+    dev->chnconf0[channel].mem_rd_rst_chn = 1;
+    dev->chnconf0[channel].mem_rd_rst_chn = 0;
+    dev->chnconf0[channel].apb_mem_rst_chn = 1;
+    dev->chnconf0[channel].apb_mem_rst_chn = 0;
+}
+
+/**
+ * @brief Enable DMA access for TX channel
+ *
+ * @param dev Peripheral instance address
+ * @param channel RMT TX channel number
+ * @param enable True to enable, False to disable
+ */
+static inline void rmt_ll_tx_enable_dma(rmt_dev_t *dev, uint32_t channel, bool enable)
+{
+    HAL_ASSERT(channel == 3 && "only TX channel 3 has DMA ability");
+    dev->chnconf0[channel].dma_access_en_chn = enable;
+}
+
+/**
+ * @brief Start transmitting for TX channel
+ *
+ * @param dev Peripheral instance address
+ * @param channel RMT TX channel number
+ */
+__attribute__((always_inline))
+static inline void rmt_ll_tx_start(rmt_dev_t *dev, uint32_t channel)
+{
+    // update other configuration registers before start transmitting
+    dev->chnconf0[channel].conf_update_chn = 1;
+    dev->chnconf0[channel].tx_start_chn = 1;
+}
+
+/**
+ * @brief Stop transmitting for TX channel
+ *
+ * @param dev Peripheral instance address
+ * @param channel RMT TX channel number
+ */
+__attribute__((always_inline))
+static inline void rmt_ll_tx_stop(rmt_dev_t *dev, uint32_t channel)
+{
+    dev->chnconf0[channel].tx_stop_chn = 1;
+    // stop won't take place until configurations updated
+    dev->chnconf0[channel].conf_update_chn = 1;
+}
+
+/**
+ * @brief Set memory block number for TX channel
+ *
+ * @param dev Peripheral instance address
+ * @param channel RMT TX channel number
+ * @param block_num memory block number
+ */
+static inline void rmt_ll_tx_set_mem_blocks(rmt_dev_t *dev, uint32_t channel, uint8_t block_num)
+{
+    dev->chnconf0[channel].mem_size_chn = block_num;
+}
+
+/**
+ * @brief Enable TX wrap
+ *
+ * @param dev Peripheral instance address
+ * @param channel RMT TX channel number
+ * @param enable True to enable, False to disable
+ */
+static inline void rmt_ll_tx_enable_wrap(rmt_dev_t *dev, uint32_t channel, bool enable)
+{
+    dev->chnconf0[channel].mem_tx_wrap_en_chn = enable;
+}
+
+/**
+ * @brief Enable transmitting in a loop
+ *
+ * @param dev Peripheral instance address
+ * @param channel RMT TX channel number
+ * @param enable True to enable, False to disable
+ */
+__attribute__((always_inline))
+static inline void rmt_ll_tx_enable_loop(rmt_dev_t *dev, uint32_t channel, bool enable)
+{
+    dev->chnconf0[channel].tx_conti_mode_chn = enable;
+}
+
+/**
+ * @brief Set loop count for TX channel
+ *
+ * @param dev  Peripheral instance address
+ * @param channel RMT TX channel number
+ * @param count TX loop count
+ */
+__attribute__((always_inline))
+static inline void rmt_ll_tx_set_loop_count(rmt_dev_t *dev, uint32_t channel, uint32_t count)
+{
+    HAL_ASSERT(count <= RMT_LL_MAX_LOOP_COUNT_PER_BATCH && "loop count out of range");
+    dev->chn_tx_lim[channel].tx_loop_num_chn = count;
+}
+
+/**
+ * @brief Reset loop count for TX channel
+ *
+ * @param dev Peripheral instance address
+ * @param channel RMT TX channel number
+ */
+__attribute__((always_inline))
+static inline void rmt_ll_tx_reset_loop_count(rmt_dev_t *dev, uint32_t channel)
+{
+    dev->chn_tx_lim[channel].loop_count_reset_chn = 1;
+    dev->chn_tx_lim[channel].loop_count_reset_chn = 0;
+}
+
+/**
+ * @brief Enable loop count for TX channel
+ *
+ * @param dev Peripheral instance address
+ * @param channel RMT TX channel number
+ * @param enable True to enable, False to disable
+ */
+__attribute__((always_inline))
+static inline void rmt_ll_tx_enable_loop_count(rmt_dev_t *dev, uint32_t channel, bool enable)
+{
+    dev->chn_tx_lim[channel].tx_loop_cnt_en_chn = enable;
+}
+
+/**
+ * @brief Enable loop stop at count value automatically
+ *
+ * @param dev Peripheral instance address
+ * @param channel RMT TX channel number
+ * @param enable True to enable, False to disable
+ */
+__attribute__((always_inline))
+static inline void rmt_ll_tx_enable_loop_autostop(rmt_dev_t *dev, uint32_t channel, bool enable)
+{
+    dev->chn_tx_lim[channel].loop_stop_en_chn = enable;
+}
+
+/**
+ * @brief Enable transmit multiple channels synchronously
+ *
+ * @param dev Peripheral instance address
+ * @param enable True to enable, False to disable
+ */
+static inline void rmt_ll_tx_enable_sync(rmt_dev_t *dev, bool enable)
+{
+    dev->tx_sim.tx_sim_en = enable;
+}
+
+/**
+ * @brief Clear the TX channels synchronous group
+ *
+ * @param dev Peripheral instance address
+ */
+static inline void rmt_ll_tx_clear_sync_group(rmt_dev_t *dev)
+{
+    dev->tx_sim.val &= ~(0x0F);
+}
+
+/**
+ * @brief Add TX channels to the synchronous group
+ *
+ * @param dev Peripheral instance address
+ * @param channel_mask Mask of TX channels to be added to the synchronous group
+ */
+static inline void rmt_ll_tx_sync_group_add_channels(rmt_dev_t *dev, uint32_t channel_mask)
+{
+    dev->tx_sim.val |= (channel_mask & 0x0F);
+}
+
+/**
+ * @brief Remove TX channels from the synchronous group
+ *
+ * @param dev Peripheral instance address
+ * @param channel_mask Mask of TX channels to be removed from the synchronous group
+ */
+static inline void rmt_ll_tx_sync_group_remove_channels(rmt_dev_t *dev, uint32_t channel_mask)
+{
+    dev->tx_sim.val &= ~channel_mask;
+}
+
+/**
+ * @brief Fix the output level when TX channel is in IDLE state
+ *
+ * @param dev Peripheral instance address
+ * @param channel RMT TX channel number
+ * @param level IDLE level (1 => high, 0 => low)
+ * @param enable True to fix the IDLE level, otherwise the IDLE level is determined by EOF encoder
+ */
+__attribute__((always_inline))
+static inline void rmt_ll_tx_fix_idle_level(rmt_dev_t *dev, uint32_t channel, uint8_t level, bool enable)
+{
+    dev->chnconf0[channel].idle_out_en_chn = enable;
+    dev->chnconf0[channel].idle_out_lv_chn = level;
+}
+
+/**
+ * @brief Set the amount of RMT symbols that can trigger the limitation interrupt
+ *
+ * @param dev Peripheral instance address
+ * @param channel RMT TX channel number
+ * @param limit Specify the number of symbols
+ */
+static inline void rmt_ll_tx_set_limit(rmt_dev_t *dev, uint32_t channel, uint32_t limit)
+{
+    dev->chn_tx_lim[channel].tx_lim_chn = limit;
+}
+
+/**
+ * @brief Set high and low duration of carrier signal
+ *
+ * @param dev Peripheral instance address
+ * @param channel RMT TX channel number
+ * @param high_ticks Duration of high level
+ * @param low_ticks Duration of low level
+ */
+static inline void rmt_ll_tx_set_carrier_high_low_ticks(rmt_dev_t *dev, uint32_t channel, uint32_t high_ticks, uint32_t low_ticks)
+{
+    HAL_ASSERT(high_ticks >= 1 && high_ticks <= 65536 && low_ticks >= 1 && low_ticks <= 65536 && "out of range high/low ticks");
+    // ticks=0 means 65536 in hardware
+    if (high_ticks >= 65536) {
+        high_ticks = 0;
+    }
+    if (low_ticks >= 65536) {
+        low_ticks = 0;
+    }
+    HAL_FORCE_MODIFY_U32_REG_FIELD(dev->chncarrier_duty[channel], carrier_high_chn, high_ticks);
+    HAL_FORCE_MODIFY_U32_REG_FIELD(dev->chncarrier_duty[channel], carrier_low_chn, low_ticks);
+}
+
+/**
+ * @brief Enable modulating carrier signal to TX channel
+ *
+ * @param dev Peripheral instance address
+ * @param channel RMT TX channel number
+ * @param enable True to enable, False to disable
+ */
+static inline void rmt_ll_tx_enable_carrier_modulation(rmt_dev_t *dev, uint32_t channel, bool enable)
+{
+    dev->chnconf0[channel].carrier_en_chn = enable;
+}
+
+/**
+ * @brief Set on high or low to modulate the carrier signal
+ *
+ * @param dev Peripheral instance address
+ * @param channel RMT TX channel number
+ * @param level Which level to modulate on (0=>low level, 1=>high level)
+ */
+static inline void rmt_ll_tx_set_carrier_level(rmt_dev_t *dev, uint32_t channel, uint8_t level)
+{
+    dev->chnconf0[channel].carrier_out_lv_chn = level;
+}
+
+/**
+ * @brief Enable to always output carrier signal, regardless of a valid data transmission
+ *
+ * @param dev Peripheral instance address
+ * @param channel RMT TX channel number
+ * @param enable True to output carrier signal in all RMT state, False to only output carrier signal for effective data
+ */
+static inline void rmt_ll_tx_enable_carrier_always_on(rmt_dev_t *dev, uint32_t channel, bool enable)
+{
+    dev->chnconf0[channel].carrier_eff_en_chn = !enable;
+}
+
+////////////////////////////////////////RX Channel Specific/////////////////////////////////////////////////////////////
+
+/**
+ * @brief Reset clock divider for RX channels by mask
+ *
+ * @param dev Peripheral instance address
+ * @param channel_mask Mask of RX channels
+ */
+static inline void rmt_ll_rx_reset_channels_clock_div(rmt_dev_t *dev, uint32_t channel_mask)
+{
+    // write 1 to reset
+    dev->ref_cnt_rst.val |= ((channel_mask & 0x0F) << 4);
+}
+
+/**
+ * @brief Set RX channel clock divider
+ *
+ * @param dev Peripheral instance address
+ * @param channel RMT RX channel number
+ * @param div Division value
+ */
+static inline void rmt_ll_rx_set_channel_clock_div(rmt_dev_t *dev, uint32_t channel, uint32_t div)
+{
+    HAL_ASSERT(div >= 1 && div <= 256 && "divider out of range");
+    // limit the maximum divider to 256
+    if (div >= 256) {
+        div = 0; // 0 means 256 division
+    }
+    HAL_FORCE_MODIFY_U32_REG_FIELD(dev->chmconf[channel].conf0, div_cnt_chm, div);
+}
+
+/**
+ * @brief Reset RMT writing pointer for RX channel
+ *
+ * @param dev Peripheral instance address
+ * @param channel RMT RX channel number
+ */
+__attribute__((always_inline))
+static inline void rmt_ll_rx_reset_pointer(rmt_dev_t *dev, uint32_t channel)
+{
+    dev->chmconf[channel].conf1.mem_wr_rst_chm = 1;
+    dev->chmconf[channel].conf1.mem_wr_rst_chm = 0;
+    dev->chmconf[channel].conf1.apb_mem_rst_chm = 1;
+    dev->chmconf[channel].conf1.apb_mem_rst_chm = 0;
+}
+
+/**
+ * @brief Enable DMA access for RX channel
+ *
+ * @param dev Peripheral instance address
+ * @param channel RMT RX channel number
+ * @param enable True to enable, False to disable
+ */
+static inline void rmt_ll_rx_enable_dma(rmt_dev_t *dev, uint32_t channel, bool enable)
+{
+    HAL_ASSERT(channel == 3 && "only RX channel 3 has DMA ability");
+    dev->chmconf[channel].conf0.dma_access_en_chm = enable;
+}
+
+/**
+ * @brief Enable receiving for RX channel
+ *
+ * @param dev Peripheral instance address
+ * @param channel RMT RX channel number
+ * @param enable True to enable, False to disable
+ */
+__attribute__((always_inline))
+static inline void rmt_ll_rx_enable(rmt_dev_t *dev, uint32_t channel, bool enable)
+{
+    dev->chmconf[channel].conf1.rx_en_chm = enable;
+    // rx won't be enabled until configurations updated
+    dev->chmconf[channel].conf1.conf_update_chm = 1;
+}
+
+/**
+ * @brief Set memory block number for RX channel
+ *
+ * @param dev Peripheral instance address
+ * @param channel RMT RX channel number
+ * @param block_num memory block number
+ */
+static inline void rmt_ll_rx_set_mem_blocks(rmt_dev_t *dev, uint32_t channel, uint8_t block_num)
+{
+    dev->chmconf[channel].conf0.mem_size_chm = block_num;
+}
+
+/**
+ * @brief Set the time length for RX channel before going into IDLE state
+ *
+ * @param dev Peripheral instance address
+ * @param channel RMT RX channel number
+ * @param thres Time length threshold
+ */
+__attribute__((always_inline))
+static inline void rmt_ll_rx_set_idle_thres(rmt_dev_t *dev, uint32_t channel, uint32_t thres)
+{
+    dev->chmconf[channel].conf0.idle_thres_chm = thres;
+}
+
+/**
+ * @brief Set RMT memory owner for RX channel
+ *
+ * @param dev Peripheral instance address
+ * @param channel RMT RX channel number
+ * @param owner Memory owner
+ */
+__attribute__((always_inline))
+static inline void rmt_ll_rx_set_mem_owner(rmt_dev_t *dev, uint32_t channel, rmt_ll_mem_owner_t owner)
+{
+    dev->chmconf[channel].conf1.mem_owner_chm = owner;
+}
+
+/**
+ * @brief Enable filter for RX channel
+ *
+ * @param dev Peripheral instance address
+ * @param channel RMT RX chanenl number
+ * @param enable True to enable, False to disable
+ */
+__attribute__((always_inline))
+static inline void rmt_ll_rx_enable_filter(rmt_dev_t *dev, uint32_t channel, bool enable)
+{
+    dev->chmconf[channel].conf1.rx_filter_en_chm = enable;
+}
+
+/**
+ * @brief Set RX channel filter threshold (i.e. the maximum width of one pulse signal that would be treated as a noise)
+ *
+ * @param dev Peripheral instance address
+ * @param channel RMT RX channel number
+ * @param thres Filter threshold
+ */
+__attribute__((always_inline))
+static inline void rmt_ll_rx_set_filter_thres(rmt_dev_t *dev, uint32_t channel, uint32_t thres)
+{
+    HAL_FORCE_MODIFY_U32_REG_FIELD(dev->chmconf[channel].conf1, rx_filter_thres_chm, thres);
+}
+
+/**
+ * @brief Get RMT memory write cursor offset
+ *
+ * @param dev Peripheral instance address
+ * @param channel RMT RX channel number
+ * @return writer offset
+ */
+__attribute__((always_inline))
+static inline uint32_t rmt_ll_rx_get_memory_writer_offset(rmt_dev_t *dev, uint32_t channel)
+{
+    return dev->chmstatus[channel].mem_waddr_ex_chm - (channel + 4) * 48;
+}
+
+/**
+ * @brief Set the amount of RMT symbols that can trigger the limitation interrupt
+ *
+ * @param dev Peripheral instance address
+ * @param channel RMT RX channel number
+ * @param limit Specify the number of symbols
+ */
+static inline void rmt_ll_rx_set_limit(rmt_dev_t *dev, uint32_t channel, uint32_t limit)
+{
+    dev->chm_rx_lim[channel].rx_lim_chm = limit;
+}
+
+/**
+ * @brief Set high and low duration of carrier signal
+ *
+ * @param dev dev Peripheral instance address
+ * @param channel RMT TX channel number
+ * @param high_ticks Duration of high level
+ * @param low_ticks Duration of low level
+ */
+static inline void rmt_ll_rx_set_carrier_high_low_ticks(rmt_dev_t *dev, uint32_t channel, uint32_t high_ticks, uint32_t low_ticks)
+{
+    HAL_ASSERT(high_ticks >= 1 && high_ticks <= 65536 && low_ticks >= 1 && low_ticks <= 65536 && "out of range high/low ticks");
+    HAL_FORCE_MODIFY_U32_REG_FIELD(dev->chm_rx_carrier_rm[channel], carrier_high_thres_chm, high_ticks - 1);
+    HAL_FORCE_MODIFY_U32_REG_FIELD(dev->chm_rx_carrier_rm[channel], carrier_low_thres_chm, low_ticks - 1);
+}
+
+/**
+ * @brief Enable demodulating the carrier on RX channel
+ *
+ * @param dev Peripheral instance address
+ * @param channel RMT RX channel number
+ * @param enable True to enable, False to disable
+ */
+static inline void rmt_ll_rx_enable_carrier_demodulation(rmt_dev_t *dev, uint32_t channel, bool enable)
+{
+    dev->chmconf[channel].conf0.carrier_en_chm = enable;
+}
+
+/**
+ * @brief Set on high or low to demodulate the carrier signal
+ *
+ * @param dev Peripheral instance address
+ * @param channel RMT RX channel number
+ * @param level Which level to demodulate (0=>low level, 1=>high level)
+ */
+static inline void rmt_ll_rx_set_carrier_level(rmt_dev_t *dev, uint32_t channel, uint8_t level)
+{
+    dev->chmconf[channel].conf0.carrier_out_lv_chm = level;
+}
+
+/**
+ * @brief Enable RX wrap
+ *
+ * @param dev Peripheral instance address
+ * @param channel RMT RX channel number
+ * @param enable True to enable, False to disable
+ */
+static inline void rmt_ll_rx_enable_wrap(rmt_dev_t *dev, uint32_t channel, bool enable)
+{
+    dev->chmconf[channel].conf1.mem_rx_wrap_en_chm = enable;
+}
+
+//////////////////////////////////////////Interrupt Specific////////////////////////////////////////////////////////////
+
+/**
+ * @brief Enable RMT interrupt for specific event mask
+ *
+ * @param dev Peripheral instance address
+ * @param mask Event mask
+ * @param enable True to enable, False to disable
+ */
+__attribute__((always_inline))
+static inline void rmt_ll_enable_interrupt(rmt_dev_t *dev, uint32_t mask, bool enable)
+{
+    if (enable) {
+        dev->int_ena.val |= mask;
+    } else {
+        dev->int_ena.val &= ~mask;
+    }
+}
+
+/**
+ * @brief Clear RMT interrupt status by mask
+ *
+ * @param dev Peripheral instance address
+ * @param mask Interrupt status mask
+ */
+__attribute__((always_inline))
+static inline void rmt_ll_clear_interrupt_status(rmt_dev_t *dev, uint32_t mask)
+{
+    dev->int_clr.val = mask;
+}
+
+/**
+ * @brief Get interrupt status register address
+ *
+ * @param dev Peripheral instance address
+ * @return Register address
+ */
+static inline volatile void *rmt_ll_get_interrupt_status_reg(rmt_dev_t *dev)
+{
+    return &dev->int_st;
+}
+
+/**
+ * @brief Get interrupt status for TX channel
+ *
+ * @param dev Peripheral instance address
+ * @param channel RMT TX channel number
+ * @return Interrupt status
+ */
+__attribute__((always_inline))
+static inline uint32_t rmt_ll_tx_get_interrupt_status(rmt_dev_t *dev, uint32_t channel)
+{
+    return dev->int_st.val & RMT_LL_EVENT_TX_MASK(channel);
+}
+
+/**
+ * @brief Get interrupt raw status for TX channel
+ *
+ * @param dev Peripheral instance address
+ * @param channel RMT TX channel number
+ * @return Interrupt raw status
+ */
+static inline uint32_t rmt_ll_tx_get_interrupt_status_raw(rmt_dev_t *dev, uint32_t channel)
+{
+    return dev->int_raw.val & (RMT_LL_EVENT_TX_MASK(channel) | RMT_LL_EVENT_TX_ERROR(channel));
+}
+
+/**
+ * @brief Get interrupt raw status for RX channel
+ *
+ * @param dev Peripheral instance address
+ * @param channel RMT RX channel number
+ * @return Interrupt raw status
+ */
+static inline uint32_t rmt_ll_rx_get_interrupt_status_raw(rmt_dev_t *dev, uint32_t channel)
+{
+    return dev->int_raw.val & (RMT_LL_EVENT_RX_MASK(channel) | RMT_LL_EVENT_RX_ERROR(channel));
+}
+
+/**
+ * @brief Get interrupt status for RX channel
+ *
+ * @param dev Peripheral instance address
+ * @param channel RMT RX channel number
+ * @return Interrupt status
+ */
+__attribute__((always_inline))
+static inline uint32_t rmt_ll_rx_get_interrupt_status(rmt_dev_t *dev, uint32_t channel)
+{
+    return dev->int_st.val & RMT_LL_EVENT_RX_MASK(channel);
+}
+
+#ifdef __cplusplus
+}
+#endif

components/esp_hal_rmt/esp32s31/rmt_periph.c

@@ -0,0 +1,80 @@
+/*
+ * SPDX-FileCopyrightText: 2026 Espressif Systems (Shanghai) CO LTD
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+#include "hal/rmt_periph.h"
+#include "soc/gpio_sig_map.h"
+#include "soc/rmt_reg.h"
+
+const soc_rmt_signal_desc_t soc_rmt_signals[1] = {
+    [0] = {
+        .irq = ETS_RMT_INTR_SOURCE,
+        .module_name = "rmt0",
+        .channels = {
+            [0] = {
+                .tx_sig = RMT_SIG_OUT0_IDX,
+                .rx_sig = -1
+            },
+            [1] = {
+                .tx_sig = RMT_SIG_OUT1_IDX,
+                .rx_sig = -1
+            },
+            [2] = {
+                .tx_sig = RMT_SIG_OUT2_IDX,
+                .rx_sig = -1
+            },
+            [3] = {
+                .tx_sig = RMT_SIG_OUT3_IDX,
+                .rx_sig = -1
+            },
+            [4] = {
+                .tx_sig = -1,
+                .rx_sig = RMT_SIG_IN0_IDX
+            },
+            [5] = {
+                .tx_sig = -1,
+                .rx_sig = RMT_SIG_IN1_IDX
+            },
+            [6] = {
+                .tx_sig = -1,
+                .rx_sig = RMT_SIG_IN2_IDX
+            },
+            [7] = {
+                .tx_sig = -1,
+                .rx_sig = RMT_SIG_IN3_IDX
+            },
+        }
+    }
+};
+
+/**
+ * RMT Registers to be saved during sleep retention
+ * - Channel configuration registers, e.g.: RMT_CH0CONF0_REG, RMT_CH3CONF0_REG, RMT_CH3CONF1_REG, RMT_CH0_TX_LIM_REG, RMT_CH3_RX_LIM_REG
+ * - TX synchronization registers, e.g.: RMT_TX_SIM_REG
+ * - Interrupt enable registers, e.g.: RMT_INT_ENA_REG
+ * - Carrier duty registers, e.g.: RMT_CH0CARRIER_DUTY_REG, RMT_CH3_RX_CARRIER_RM_REG
+ * - Global configuration registers, e.g.: RMT_SYS_CONF_REG
+ */
+#define RMT_RETENTION_REGS_CNT 31
+#define RMT_RETENTION_REGS_BASE (DR_REG_RMT_BASE + 0x20)
+static const uint32_t rmt_regs_map[4] = {0xff400fff, 0x3ff, 0x0, 0x0};
+static const regdma_entries_config_t rmt_regdma_entries[] = {
+    [0] = {
+        .config = REGDMA_LINK_ADDR_MAP_INIT(REGDMA_RMT_LINK(0x00),
+                                            RMT_RETENTION_REGS_BASE, RMT_RETENTION_REGS_BASE,
+                                            RMT_RETENTION_REGS_CNT, 0, 0,
+                                            rmt_regs_map[0], rmt_regs_map[1],
+                                            rmt_regs_map[2], rmt_regs_map[3]),
+        .owner = ENTRY(0),
+    },
+};
+
+const rmt_reg_retention_info_t rmt_reg_retention_info[1] = {
+    [0] = {
+        .module = SLEEP_RETENTION_MODULE_RMT0,
+        .regdma_entry_array = rmt_regdma_entries,
+        .array_size = ARRAY_SIZE(rmt_regdma_entries),
+    },
+};

components/soc/esp32s31/include/soc/Kconfig.soc_caps.in

@@ -59,6 +59,10 @@ config SOC_RTC_MEM_SUPPORTED
     bool
     default y
 
+config SOC_RMT_SUPPORTED
+    bool
+    default y
+
 config SOC_SDM_SUPPORTED
     bool
     default y
@@ -323,6 +327,30 @@ config SOC_LEDC_CHANNEL_NUM
     int
     default 6
 
+config SOC_RMT_MEM_WORDS_PER_CHANNEL
+    int
+    default 48
+
+config SOC_RMT_SUPPORT_RX_PINGPONG
+    bool
+    default y
+
+config SOC_RMT_SUPPORT_TX_LOOP_COUNT
+    bool
+    default y
+
+config SOC_RMT_SUPPORT_TX_LOOP_AUTO_STOP
+    bool
+    default y
+
+config SOC_RMT_SUPPORT_DMA
+    bool
+    default y
+
+config SOC_RMT_SUPPORT_SLEEP_RETENTION
+    bool
+    default y
+
 config SOC_MMU_PERIPH_NUM
     int
     default 2

components/soc/esp32s31/include/soc/clk_tree_defs.h

@@ -209,6 +209,21 @@ typedef enum {
 
 //////////////////////////////////////////////////RMT///////////////////////////////////////////////////////////////////
 
+/**
+ * @brief Array initializer for all supported clock sources of RMT
+ */
+#define SOC_RMT_CLKS {SOC_MOD_CLK_PLL_F80M, SOC_MOD_CLK_RC_FAST, SOC_MOD_CLK_XTAL}
+
+/**
+ * @brief Type of RMT clock source
+ */
+typedef enum {
+    RMT_CLK_SRC_PLL_F80M = SOC_MOD_CLK_PLL_F80M, /*!< Select PLL_F80M as the source clock */
+    RMT_CLK_SRC_RC_FAST = SOC_MOD_CLK_RC_FAST,   /*!< Select RC_FAST as the source clock */
+    RMT_CLK_SRC_XTAL = SOC_MOD_CLK_XTAL,         /*!< Select XTAL as the source clock */
+    RMT_CLK_SRC_DEFAULT = SOC_MOD_CLK_PLL_F80M,  /*!< Select PLL_F80M as the default choice */
+} soc_periph_rmt_clk_src_t;
+
 ///////////////////////////////////////////////////UART/////////////////////////////////////////////////////////////////
 
 /**

components/soc/esp32s31/include/soc/soc_caps.h

@@ -54,7 +54,7 @@
 #define SOC_EFUSE_SUPPORTED             1         // TODO: [ESP32S31] IDF-14688
 #define SOC_RTC_FAST_MEM_SUPPORTED      1
 #define SOC_RTC_MEM_SUPPORTED           1      // TODO: [ESP32S31] IDF-14645
-// #define SOC_RMT_SUPPORTED               1      // TODO: [ESP32S31] IDF-14794
+#define SOC_RMT_SUPPORTED               1
 // #define SOC_I2S_SUPPORTED               1      // TODO: [ESP32S31] IDF-14771
 #define SOC_SDM_SUPPORTED               1
 // #define SOC_GPSPI_SUPPORTED             1      // TODO: [ESP32S31] IDF-14734
@@ -208,6 +208,14 @@
 // TODO: [ESP32S31] IDF-14709
 #define SOC_LEDC_CHANNEL_NUM                (6)
 
+/*--------------------------- RMT CAPS ---------------------------------------*/
+#define SOC_RMT_MEM_WORDS_PER_CHANNEL         48 /*!< Each channel owns 48 words memory (1 word = 4 Bytes) */
+#define SOC_RMT_SUPPORT_RX_PINGPONG           1  /*!< Support Ping-Pong mode on RX path */
+#define SOC_RMT_SUPPORT_TX_LOOP_COUNT         1  /*!< Support transmit specified number of cycles in loop mode */
+#define SOC_RMT_SUPPORT_TX_LOOP_AUTO_STOP     1  /*!< Hardware support of auto-stop in loop mode */
+#define SOC_RMT_SUPPORT_DMA                   1  /*!< RMT peripheral can connect to DMA channel */
+#define SOC_RMT_SUPPORT_SLEEP_RETENTION       1  /*!< The sleep retention feature can help back up RMT registers before sleep */
+
 /*-------------------------- MMU CAPS ----------------------------------------*/
 #define SOC_MMU_PERIPH_NUM                    (2U)
 #define SOC_MMU_LINEAR_ADDRESS_REGION_NUM     (2U)

components/soc/esp32s31/ld/esp32s31.peripherals.ld

@@ -15,6 +15,7 @@ PROVIDE ( AXI_DMA             = 0x20348000 );
 PROVIDE ( GMAC                = 0x20350000 );
 PROVIDE ( PVT                 = 0x20354000 );
 PROVIDE ( RMT                 = 0x20355000 );
+PROVIDE ( RMTMEM              = 0x20355800 );
 PROVIDE ( BITSCRAMBLER        = 0x20356000 );
 PROVIDE ( ASRC                = 0x20357000 );
 PROVIDE ( CNNT_SYS_REG        = 0x20359000 );

components/soc/esp32s31/register/soc/rmt_struct.h

@@ -108,7 +108,11 @@ typedef union {
          *  synchronization bit for CHANNELn
          */
         uint32_t conf_update_chn:1;
-        uint32_t reserved_25:7;
+        /** dma_access_en_chn : WT; bitpos: [25]; default: 0;
+         *  DMA access control bit for CHANNELn (only CHANNEL3 has this control bit)
+         */
+        uint32_t dma_access_en_chn: 1;
+        uint32_t reserved_26: 6;
     };
     uint32_t val;
 } rmt_chnconf0_reg_t;
@@ -127,7 +131,10 @@ typedef union {
          *  than this register value, received process is finished.
          */
         uint32_t idle_thres_chm:15;
-        uint32_t reserved_23:1;
+        /** dma_access_en_m : WT; bitpos: [23]; default: 0;
+         *  DMA access control bit for CHANNELm (only channel7 has this control bit)
+         */
+        uint32_t dma_access_en_chm: 1;
         /** mem_size_chm : R/W; bitpos: [27:24]; default: 1;
          *  This register is used to configure the maximum size of memory allocated to CHANNELm.
          */
@@ -1038,18 +1045,14 @@ typedef union {
 } rmt_date_reg_t;
 
 
-typedef struct {
+typedef struct rmt_dev_t {
     volatile rmt_chndata_reg_t chndata[4];
     volatile rmt_chmdata_reg_t chmdata[4];
     volatile rmt_chnconf0_reg_t chnconf0[4];
-    volatile rmt_chmconf0_reg_t ch4conf0;
-    volatile rmt_chmconf1_reg_t ch4conf1;
-    volatile rmt_chmconf0_reg_t ch5conf0;
-    volatile rmt_chmconf1_reg_t ch5conf1;
-    volatile rmt_chmconf0_reg_t ch6conf0;
-    volatile rmt_chmconf1_reg_t ch6conf1;
-    volatile rmt_chmconf0_reg_t ch7conf0;
-    volatile rmt_chmconf1_reg_t ch7conf1;
+    volatile struct {
+        rmt_chmconf0_reg_t conf0;
+        rmt_chmconf1_reg_t conf1;
+    } chmconf[4];
     volatile rmt_chnstatus_reg_t chnstatus[4];
     volatile rmt_chmstatus_reg_t chmstatus[4];
     volatile rmt_int_raw_reg_t int_raw;
@@ -1066,6 +1069,8 @@ typedef struct {
     volatile rmt_date_reg_t date;
 } rmt_dev_t;
 
+extern rmt_dev_t RMT;
+
 
 #ifndef __cplusplus
 _Static_assert(sizeof(rmt_dev_t) == 0xd0, "Invalid size of rmt_dev_t structure");

examples/get-started/blink/README.md

@@ -1,5 +1,5 @@
-| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-C61 | ESP32-H2 | ESP32-H21 | ESP32-H4 | ESP32-P4 | ESP32-S2 | ESP32-S3 |
-| ----------------- | ----- | -------- | -------- | -------- | -------- | --------- | -------- | --------- | -------- | -------- | -------- | -------- |
+| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-C61 | ESP32-H2 | ESP32-H21 | ESP32-H4 | ESP32-P4 | ESP32-S2 | ESP32-S3 | ESP32-S31 |
+| ----------------- | ----- | -------- | -------- | -------- | -------- | --------- | -------- | --------- | -------- | -------- | -------- | -------- | --------- |
 
 # Blink Example
 

examples/get-started/blink/pytest_blink.py

@@ -10,7 +10,6 @@ from pytest_embedded_idf.utils import idf_parametrize
 
 @pytest.mark.generic
 @idf_parametrize('target', ['supported_targets'], indirect=['target'])
-@pytest.mark.temp_skip_ci(targets=['esp32s31'], reason='s31 bringup on this module is not done')
 def test_blink(dut: IdfDut) -> None:
     # check and log bin size
     binary_file = os.path.join(dut.app.binary_path, 'blink.bin')

examples/peripherals/rmt/dshot_esc/README.md

@@ -1,5 +1,5 @@
-| Supported Targets | ESP32 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-H2 | ESP32-H21 | ESP32-H4 | ESP32-P4 | ESP32-S2 | ESP32-S3 |
-| ----------------- | ----- | -------- | -------- | -------- | -------- | --------- | -------- | -------- | -------- | -------- |
+| Supported Targets | ESP32 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-H2 | ESP32-H21 | ESP32-H4 | ESP32-P4 | ESP32-S2 | ESP32-S3 | ESP32-S31 |
+| ----------------- | ----- | -------- | -------- | -------- | -------- | --------- | -------- | -------- | -------- | -------- | --------- |
 # RMT Infinite Loop Transmit Example -- Dshot ESC (Electronic Speed Controller)
 
 (See the README.md file in the upper level 'examples' directory for more information about examples.)

examples/peripherals/rmt/dshot_esc/pytest_dshot_esc.py

@@ -3,14 +3,11 @@
 import pytest
 from pytest_embedded import Dut
 from pytest_embedded_idf.utils import idf_parametrize
+from pytest_embedded_idf.utils import soc_filtered_targets
 
 
 @pytest.mark.generic
-@idf_parametrize(
-    'target',
-    ['esp32', 'esp32s2', 'esp32s3', 'esp32c3', 'esp32c5', 'esp32c6', 'esp32h2', 'esp32p4'],
-    indirect=['target'],
-)
+@idf_parametrize('target', soc_filtered_targets('SOC_RMT_SUPPORTED == 1'), indirect=['target'])
 def test_dshot_esc_example(dut: Dut) -> None:
     dut.expect_exact('example: Create RMT TX channel')
     dut.expect_exact('example: Install Dshot ESC encoder')

examples/peripherals/rmt/ir_nec_transceiver/README.md

@@ -1,5 +1,5 @@
-| Supported Targets | ESP32 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-H2 | ESP32-H21 | ESP32-H4 | ESP32-P4 | ESP32-S2 | ESP32-S3 |
-| ----------------- | ----- | -------- | -------- | -------- | -------- | --------- | -------- | -------- | -------- | -------- |
+| Supported Targets | ESP32 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-H2 | ESP32-H21 | ESP32-H4 | ESP32-P4 | ESP32-S2 | ESP32-S3 | ESP32-S31 |
+| ----------------- | ----- | -------- | -------- | -------- | -------- | --------- | -------- | -------- | -------- | -------- | --------- |
 # IR NEC Encoding and Decoding Example
 
 (See the README.md file in the upper level 'examples' directory for more information about examples.)

examples/peripherals/rmt/led_strip/README.md

@@ -1,5 +1,5 @@
-| Supported Targets | ESP32 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-H2 | ESP32-H21 | ESP32-H4 | ESP32-P4 | ESP32-S2 | ESP32-S3 |
-| ----------------- | ----- | -------- | -------- | -------- | -------- | --------- | -------- | -------- | -------- | -------- |
+| Supported Targets | ESP32 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-H2 | ESP32-H21 | ESP32-H4 | ESP32-P4 | ESP32-S2 | ESP32-S3 | ESP32-S31 |
+| ----------------- | ----- | -------- | -------- | -------- | -------- | --------- | -------- | -------- | -------- | -------- | --------- |
 # RMT Transmit Example -- LED Strip
 
 (See the README.md file in the upper level 'examples' directory for more information about examples.)

examples/peripherals/rmt/led_strip/pytest_led_strip.py

@@ -3,14 +3,11 @@
 import pytest
 from pytest_embedded import Dut
 from pytest_embedded_idf.utils import idf_parametrize
+from pytest_embedded_idf.utils import soc_filtered_targets
 
 
 @pytest.mark.generic
-@idf_parametrize(
-    'target',
-    ['esp32', 'esp32s2', 'esp32s3', 'esp32c3', 'esp32c5', 'esp32c6', 'esp32h2', 'esp32p4'],
-    indirect=['target'],
-)
+@idf_parametrize('target', soc_filtered_targets('SOC_RMT_SUPPORTED == 1'), indirect=['target'])
 def test_led_strip_example(dut: Dut) -> None:
     dut.expect_exact('example: Create RMT TX channel')
     dut.expect_exact('example: Install led strip encoder')

examples/peripherals/rmt/led_strip_simple_encoder/README.md

@@ -1,5 +1,5 @@
-| Supported Targets | ESP32 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-H2 | ESP32-H21 | ESP32-H4 | ESP32-P4 | ESP32-S2 | ESP32-S3 |
-| ----------------- | ----- | -------- | -------- | -------- | -------- | --------- | -------- | -------- | -------- | -------- |
+| Supported Targets | ESP32 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-H2 | ESP32-H21 | ESP32-H4 | ESP32-P4 | ESP32-S2 | ESP32-S3 | ESP32-S31 |
+| ----------------- | ----- | -------- | -------- | -------- | -------- | --------- | -------- | -------- | -------- | -------- | --------- |
 # RMT Transmit Example -- LED Strip
 
 (See the README.md file in the upper level 'examples' directory for more information about examples.)

examples/peripherals/rmt/led_strip_simple_encoder/main/led_strip_example_main.c

@@ -11,7 +11,7 @@
 #include "driver/rmt_tx.h"
 
 #define RMT_LED_STRIP_RESOLUTION_HZ 10000000 // 10MHz resolution, 1 tick = 0.1us (led strip needs a high resolution)
-#define RMT_LED_STRIP_GPIO_NUM      8
+#define RMT_LED_STRIP_GPIO_NUM      0
 
 #define EXAMPLE_LED_NUMBERS         24
 

examples/peripherals/rmt/led_strip_simple_encoder/pytest_led_strip_simple_encoder.py

@@ -0,0 +1,15 @@
+# SPDX-FileCopyrightText: 2021-2025 Espressif Systems (Shanghai) CO LTD
+# SPDX-License-Identifier: CC0-1.0
+import pytest
+from pytest_embedded import Dut
+from pytest_embedded_idf.utils import idf_parametrize
+from pytest_embedded_idf.utils import soc_filtered_targets
+
+
+@pytest.mark.generic
+@idf_parametrize('target', soc_filtered_targets('SOC_RMT_SUPPORTED == 1'), indirect=['target'])
+def test_led_strip_simple_encoder_example(dut: Dut) -> None:
+    dut.expect_exact('example: Create RMT TX channel')
+    dut.expect_exact('example: Create simple callback-based encoder')
+    dut.expect_exact('example: Enable RMT TX channel')
+    dut.expect_exact('example: Start LED rainbow chase')

examples/peripherals/rmt/musical_buzzer/README.md

@@ -1,5 +1,5 @@
-| Supported Targets | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-H2 | ESP32-H21 | ESP32-H4 | ESP32-P4 | ESP32-S2 | ESP32-S3 |
-| ----------------- | -------- | -------- | -------- | -------- | --------- | -------- | -------- | -------- | -------- |
+| Supported Targets | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-H2 | ESP32-H21 | ESP32-H4 | ESP32-P4 | ESP32-S2 | ESP32-S3 | ESP32-S31 |
+| ----------------- | -------- | -------- | -------- | -------- | --------- | -------- | -------- | -------- | -------- | --------- |
 
 # RMT Transmit Loop Count Example -- Musical Buzzer
 

examples/peripherals/rmt/musical_buzzer/pytest_musical_buzzer.py

@@ -3,12 +3,11 @@
 import pytest
 from pytest_embedded import Dut
 from pytest_embedded_idf.utils import idf_parametrize
+from pytest_embedded_idf.utils import soc_filtered_targets
 
 
 @pytest.mark.generic
-@idf_parametrize(
-    'target', ['esp32s2', 'esp32s3', 'esp32c3', 'esp32c5', 'esp32c6', 'esp32h2', 'esp32p4'], indirect=['target']
-)
+@idf_parametrize('target', soc_filtered_targets('SOC_RMT_SUPPORT_TX_LOOP_COUNT == 1'), indirect=['target'])
 def test_musical_buzzer_example(dut: Dut) -> None:
     dut.expect_exact('example: Create RMT TX channel')
     dut.expect_exact('example: Install musical score encoder')

examples/peripherals/rmt/onewire/README.md

@@ -1,5 +1,5 @@
-| Supported Targets | ESP32 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-H2 | ESP32-H21 | ESP32-H4 | ESP32-P4 | ESP32-S2 | ESP32-S3 |
-| ----------------- | ----- | -------- | -------- | -------- | -------- | --------- | -------- | -------- | -------- | -------- |
+| Supported Targets | ESP32 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-H2 | ESP32-H21 | ESP32-H4 | ESP32-P4 | ESP32-S2 | ESP32-S3 | ESP32-S31 |
+| ----------------- | ----- | -------- | -------- | -------- | -------- | --------- | -------- | -------- | -------- | -------- | --------- |
 
 # Advanced RMT Transmit & Receive Example -- Simulate 1-Wire Bus
 

examples/peripherals/rmt/onewire/pytest_onewire.py

@@ -3,14 +3,11 @@
 import pytest
 from pytest_embedded import Dut
 from pytest_embedded_idf.utils import idf_parametrize
+from pytest_embedded_idf.utils import soc_filtered_targets
 
 
 @pytest.mark.generic
-@idf_parametrize(
-    'target',
-    ['esp32', 'esp32s2', 'esp32s3', 'esp32c3', 'esp32c5', 'esp32c6', 'esp32h2', 'esp32p4'],
-    indirect=['target'],
-)
+@idf_parametrize('target', soc_filtered_targets('SOC_RMT_SUPPORTED == 1'), indirect=['target'])
 def test_onewire_example(dut: Dut) -> None:
     dut.expect_exact('example: 1-Wire bus installed on GPIO')
     dut.expect_exact('example: Device iterator created, start searching')

examples/peripherals/rmt/stepper_motor/README.md

@@ -1,5 +1,5 @@
-| Supported Targets | ESP32-C5 | ESP32-C6 | ESP32-H2 | ESP32-H21 | ESP32-H4 | ESP32-P4 | ESP32-S3 |
-| ----------------- | -------- | -------- | -------- | --------- | -------- | -------- | -------- |
+| Supported Targets | ESP32-C5 | ESP32-C6 | ESP32-H2 | ESP32-H21 | ESP32-H4 | ESP32-P4 | ESP32-S3 | ESP32-S31 |
+| ----------------- | -------- | -------- | -------- | --------- | -------- | -------- | -------- | --------- |
 
 # RMT Based Stepper Motor Smooth Controller
 

examples/peripherals/rmt/stepper_motor/pytest_stepper_motor.py

@@ -3,10 +3,11 @@
 import pytest
 from pytest_embedded import Dut
 from pytest_embedded_idf.utils import idf_parametrize
+from pytest_embedded_idf.utils import soc_filtered_targets
 
 
 @pytest.mark.generic
-@idf_parametrize('target', ['esp32s3', 'esp32c5', 'esp32c6', 'esp32h2', 'esp32p4'], indirect=['target'])
+@idf_parametrize('target', soc_filtered_targets('SOC_RMT_SUPPORT_TX_LOOP_AUTO_STOP == 1'), indirect=['target'])
 def test_stepper_motor_example(dut: Dut) -> None:
     dut.expect_exact('example: Initialize EN + DIR GPIO')
     dut.expect_exact('example: Create RMT TX channel')