PMP entry 3 (SOC_DROM_MASK_HIGH, TOR mode) in the memprot path
was incorrectly granted RW permission on esp32h21 and esp32c61.
The mask ROM data region is inherently read-only; remove the W bit.
Also added necessary tests to check voilations and re-enabled
tests for ESP32P4
Add a new CMake function esp_partition_flash_binary() that provides a
unified API for registering partition data binaries to be flashed. It
replaces the direct esptool_py_flash_target calls scattered across
components (spiffs, fatfs, nvs_flash) with a single function that:
- Resolves partition offset from the partition table automatically
- Determines encryption requirements (auto-detect or ALWAYS_PLAINTEXT)
- Creates per-partition flash targets (e.g. idf.py <partition>-flash)
- Optionally includes the binary in `idf.py flash` via FLASH_IN_PROJECT
On the linux target, the function registers binaries for pre-loading
into the emulated flash. A build-time manifest (linux_flash_data.txt)
is generated via file(GENERATE), and partition_linux.c reads it at
runtime to copy each binary into the memory-mapped flash buffer at
the correct offset.
The partition_ops example is updated to use the new function and
includes a custom_partition with pre-built data to demonstrate the
full workflow, including on the linux target.
The __init_project_configuration() function in cmakev2's project.cmake
unconditionally applied app-level compiler optimization flags based on
CONFIG_COMPILER_OPTIMIZATION_* Kconfig options. When the bootloader
subproject was built with cmakev2, these app-level flags leaked into the
bootloader compile command alongside the correct bootloader-specific
flags from CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_*.
For example, with the default configuration (app: DEBUG, bootloader:
SIZE), the bootloader received both "-Og -fno-shrink-wrap" (from app
config) and "-Os -freorder-blocks" (from bootloader config). While GCC
uses the last -O flag (-Os wins), the stray -fno-shrink-wrap persisted.
Introduce a SET_COMPILER_OPTIMIZATION build property that defaults to
YES when unset. Subprojects that manage their own optimization flags
(like the bootloader) can set this to NO before calling
idf_project_init() to prevent the default optimization flags from being
applied. This keeps project.cmake generic without requiring it to know
about specific subproject types.
Signed-off-by: Frantisek Hrbata <frantisek.hrbata@espressif.com>
The idf_path variable was used in -fmacro-prefix-map and
-fdebug-prefix-map flags but never read from the IDF_PATH build
property, resulting in an empty substitution. This caused full
filesystem paths to leak into .rodata instead of being mapped to /IDF.
Signed-off-by: Frantisek Hrbata <frantisek.hrbata@espressif.com>
Commit f62f45cf5c changed target_add_binary_data to resolve the
embedded file path relative to the component directory by using
idf_component_get_property to obtain the COMPONENT_DIR. This fixed the
path resolution when target_add_binary_data is called from
idf_component_include, which runs outside the component's directory
context.
However, target_add_binary_data can also be called directly from a
project's CMakeLists.txt with a non-component target, e.g.
target_add_binary_data(app.elf ...) as done in
examples/security/security_features_app. In this case,
idf_component_get_property fails because the target is not a component.
Fix this by moving the path resolution to idf_component_include, where
the embed file paths from EMBED_FILES and EMBED_TXTFILES component
properties are resolved to absolute paths relative to COMPONENT_DIR
before being passed to target_add_binary_data. This way,
target_add_binary_data receives already absolute paths from
idf_component_include and can use plain get_filename_component(ABSOLUTE)
for direct calls, which correctly resolves relative to
CMAKE_CURRENT_SOURCE_DIR.
Fixes: f62f45cf5c ("fix(cmakev2/utilities): add a dependency target for the embedded file")
Signed-off-by: Frantisek Hrbata <frantisek.hrbata@espressif.com>
Add a GENERATE_SDKCONFIG build property that controls whether kconfgen
writes the sdkconfig file (--output config) during the configuration
step. It defaults to 1 (enabled).
When building the bootloader as a subproject, the set of components
(and their Kconfig files) differs from the main project. Running
kconfgen with --output config in this context rewrites the main
project's sdkconfig. Even when the content is identical, the timestamp
update causes ninja to detect sdkconfig as newer than build.ninja
outputs (e.g. cmake_install.cmake), triggering an infinite CMake
re-run loop.
Setting GENERATE_SDKCONFIG to 0 in a subproject prevents this,
matching the behaviour of cmakev1's __OUTPUT_SDKCONFIG property.
Signed-off-by: Frantisek Hrbata <frantisek.hrbata@espressif.com>
Add the PROJECT_COMPONENTS_SOURCE build property to control how project
components are categorised during component discovery. By default it is
set to "project_components" (priority 3 - highest), preserving the
existing behaviour.
Setting it to "idf_components" (priority 0) before calling
idf_project_init() makes the project's built-in components overridable
by user-supplied components through EXTRA_COMPONENT_DIRS (priority 2).
This is needed for sub-projects like the bootloader, whose built-in
components (e.g. main) are provided by ESP-IDF and should be overridable
by user-supplied components placed in bootloader_components/. The
cmakev1 build system allowed this override because it used a
last-one-wins strategy, but cmakev2 uses strict priority-based component
resolution where project_components always win.
Signed-off-by: Frantisek Hrbata <frantisek.hrbata@espressif.com>
Add an optional ALL parameter to idf_build_binary and idf_sign_binary
functions. When specified, the created custom target is included in the
default build target. Without ALL, custom targets created by these
functions are excluded from the default build (add_custom_target
behavior), meaning they won't be built unless explicitly requested or
depended upon by another target in ALL.
Signed-off-by: Frantisek Hrbata <frantisek.hrbata@espressif.com>
Add a helper function for printing multi-line post-build messages on a
target. The message lines are joined with newlines, written to a file at
configure time, and printed at build time using a single cmake -E cat
command, replacing the need for repeated cmake -E echo invocations.
Signed-off-by: Frantisek Hrbata <frantisek.hrbata@espressif.com>
Add a public API function to check that the bootloader binary does not
overlap the partition table, mirroring the existing idf_check_binary_size
pattern for application binaries.
Signed-off-by: Frantisek Hrbata <frantisek.hrbata@espressif.com>
The KEYFILE argument value was stored in a misspelled variable
"keyfle" instead of "keyfile", causing custom keyfile paths to
be silently ignored.
Signed-off-by: Frantisek Hrbata <frantisek.hrbata@espressif.com>
The commonly required components are configured solely for backward
compatibility with cmakev1. Since the bootloader build explicitly sets
commonly required components, we need to support this feature in cmakev2
as well. Ideally, there should be no commonly required components, and
each component should specify its requirements explicitly.
Signed-off-by: Frantisek Hrbata <frantisek.hrbata@espressif.com>
The TestIdfRootDependency tests (test_basic_build,
test_build_only_when_required, test_cleanup_unused) were introduced in
MR 39704 to validate the idf_extra_components.yml root dependency
feature. This feature relies on component manager integration that is
not yet implemented in the cmakev2 build system, causing all three
tests to fail when run with --buildv2.
Skip these tests for cmakev2 using the buildv2_skip marker until root
components support is added (IDF-14259).
Signed-off-by: Frantisek Hrbata <frantisek.hrbata@espressif.com>
Chen Jichang
igor.udot
Alexey Gerenkov
Adam Múdry
nilesh.kale
Erhan Kurubas
Alexey Lapshin
Marius Vikhammer
Island
C.S.M
Mahavir Jain
Armando (Dou Yiwen)
Roland Dobai
Guillaume Souchere
Radim Karniš
Euripedes Rocha
Ashish Sharma
Frantisek Hrbata
Fu Hanxi